What are the torque specifications and the tightening sequence of the cylinder head bolts on a 1996 Saturn SL1?
The 1996 Toyota Camry head bolt size is 5/8 by four inches. There will be eight head bolts in each head.
yes you need to replace head bolts
by removing the head bolts
Head bolts are 65 Ft. LBS Intake bolts are 35 Ft. LBS
The lug bolts on a 1996 VW Golf is a M14 x 1.5 thread, with a 17mm hex head.
replace head, head gasket, and head bolts.
When I removed mine on my 1996 seca I pulled off the top triple where the handlebars mount. Then drill a whole in the shear head bolts that secure the ignition to the bike and use an easy out bolt and screw extractor to remove the bolts.
The EGR valve is attached directly to the head, on the drivers side. It's a round device that is bolted to the head. It's relatively simple to remove, just disconnect any wiring (there should be plugs) then remove the bolts.
Special bolts! Do not replace with generic will fit bolts! But the head size on my car is 18 MM
take out the cylinder head bolts
visual of head bolts on 1999 northstar