0
on all Chrysler vehicles that i have seen you can only have either the fog lights on or the high beams. the reason is if you run both it puts a strain on the electrical system and could actually cause a fire in the steering column there is a way to get them to both come on at the same time tho i don't recommend it. if you want its your vehicle you'll have to do some research on how tho.
-mechanic for 7+ years
Add your answer:
Earn +20 pts
When turning on head lights in my 1993 ford explorer they do not work when you hold the high beam switch then the head lights work?
your bulbs are burnt out. when you switch on the high beams its only the high beams. but when you flash your brights it lights up both high and low beams.
Which lights should you use when you are drivingin a fog?
Low beams and fog lights if equipped. High beams only light-up the fog more.
Why your High beams and low beams will not work?
Fuse or dimmer switch is the only answer i can think of if lights come on but just won't go from high to low or visa versa
You have only parking lights working in your cavalier What happened to your regular lights and high beams?
hmm as you ask what happened to high beams, i am going to assume that low beam works. id this is correct i would say that your low/high beam switch needs replacing
Why do the high beams all 4 lights on my 66 Impala work but when I turn off the high beams the low beams 2 lights don't work?
I think the low beam lamps have two filaments. So it's possible that those low beam filaments in the "low beam" lamps are burnt out. When the headlights are on dim, only the two outside bulbs burn. When the high beams are on then all four will burn.
Low beam lights will not come on only the high beam lights work?
Believe it or not, you might have 2 BURNT OUT LOW BEAMS. Ive seen that a few times.
Why would the high beams work but not low beams and break and tail lights only work if instrument panel lights work 1986 300zx have checked bulbs and fuses replaced switch behind brake pedal?
headlight switch
What type of lights should you use in a fog?
Fog Lights only, Low Beam only or Fog Lights + Low Beams.
How do you turn the driving lights on for a 1999 Jeep Grand Cherokee?
I have a 99 Grand Cherokee and the driving lights are turned on by pulling on the button located at the top of the head light switch on the left side of the column, Note that the driving lights will only work with the low beams and will turn off when you switch to high beams. If you search the net you can find a way to have the driving lights and high beams on at the same time, this usually involves modifying a relay under the hood.
When the low beams are on the high beam indicator is on too?
the high beam indicator is only on when the high beams are on
Why are my day time running lights and low beam lights not working but my high beams work on my 2000 sunfire gt?
I have a 98 sunfire gt and i have only high beams which only switch on sometimes and no low beams just day lights my shop told me it could be wiring or turn signal switch they looked and determined it was the switch so i just ordered it. They can be found on carpartwholesale.com or autopartwarehouse.com for only 30 or 70 with cruise control. only need a torx wrench and small screwdriver to replace it just snaps into the wiring harness.
How do you repair low beam headlights when high beams work fine?
If the high-beams work but low-beams don't... If it's both lights, it's likely the switch is faulty. If only one light fails - it's more likely to be the individual bulb. Remember - there are two bulbs in each headlight.
