HL is a general purpose 16 bit register. It is also the address in memory of the M register.
8
register is small storage space in memory which is in use of processor There are two types of register 1. General purpose register 2. special purpose register
No.
Yes and no. You can use it as a general purpose register, but if you do that, you will lose the ability to perform arithmetic and logical computations and comparisons that would normally use the accumulator.
The CX register is a 16-bit register in the x86 architecture that is primarily used for counting operations, particularly in string manipulation and looping functions. It is part of the general-purpose registers in the CPU and can store values ranging from 0 to 65,535.
6 general purpose registers.i.e., B,C,D,E,H,L
There are two types of registers such as: a) General purpose registers b) Special purpose registers
The BX register is a general purpose register. It is a 16 bit register that represents the contatenation of the two 8 bit registers BH (B High) and BL (B Low)
Accumulator is a general purpose register.it is a 8 bit register in 8085. it stores the temporary results of a current operation doing by 8085.it is also called 'A' register
stack register is a special purpose register.
general purpose registers are basically used to hold temporarily data and intermediately result. example: ax,bx,cx,dx each of 16 bits. whereas special purpose register are primely used for memory access. it is of two types : 1. segment register and 2. index register/ pointer