I might work. Depends on the steamer and the seat and what formatting and if it has stains on it.
To remove the rear seat from a 1989 Ford Laser 4 door car, first remove the bolts anchoring the rear seat to the floor of the vehicle. Then, lift the bottom portion of the seat from the car. Then, remove the internal bolts from the hatchback or trunk of the car to remove the seat back.
To properly remove a Graco booster seat from a car, first, ensure the seat belt is unbuckled. Then, locate the release button or lever on the booster seat and press or pull it to release the seat from the car's seat. Lift the booster seat out of the car and store it in a safe place.
remove harness
i have dried white latex paint on car seat. what do i do to remove it?
There are a handful of ways you can remove an oil stain from a fabric car seat. You can for example use dish soap on the stain.
Remove four bolts. Lift it out.
Unbuckle the seat belt slide is through the opening and take it out! Its not rocket science!
Most likely the same way you remove any bucket seat in a car. 4 bolts holding the seat rails to the bottom of the car, and if it's an electrical seat, an electrical wire plug.
The advantage is you can remove the car seat from the stroller to the car. The disadvantage is the size and the bulkiness, and no room for other travel accessories.
By purchasing a car with cloth seats.
I don't think it is possible to remove that, sorry.
To remove the front seat from a Lincoln Town Car, first, slide the seat all the way forward to access the rear bolts, then use a socket wrench to remove these bolts. Next, slide the seat back to access the front bolts and remove them similarly. After all bolts are removed, disconnect any electrical connectors for seat adjustments or sensors, then carefully lift the seat out of the vehicle. Be sure to have a helper if the seat is heavy.