Yes, one can put a new steering wheel and column in a car. If it is a DIY project, one must be very careful to reconnect everything carefully so the steering column does not jam.
Get up to full speed then suddenly put maximum turn on to the steering wheel.
Worn steering parts. I would strongly suggest you take this car to a mechanic, have it put on a rack, and the steering components inspected.
Build up speed, put your hands on the steering wheel in a position so you can put alot of force on the steering wheel when you turn it. Steer VERY sharply, then instantly afterwards, press on the clutch fully, then very quickly afterwards: slam the handbrake on rapidly: then counter steer in the opposite direction and put the wheel back into the middle when the car is facing back straight.
Check your power steering fliud, if it is low this could cause the vibration you are feeling.
put the key in the ignition and turn the steering wheel and the key at the say time (turn the steering wheel to the left)
Try mooving the steering wheel back and forth. This should release the car from park.
Put the key in and move the steering wheel until the key can turn
We have put an aftermarket car stereo in a car with the controls on the steering wheel. You have to check to see if an aftermarket wiring harness is available for that year and model.
Worn steering parts or CV joint. Put the car on a rack and have everything inspected.
I myself had the steering wheel lock, And it turned out it needed a new cylinder in for the key to make complete contact and start the car. I had to have it towed to a Ford dealer and put in a new cylinder. Its a common problem among fords so I wouldn't rule that out. .
The thief or thieves could, possibly, put dollies under the front wheels and tow it away.
it should be on the centre of the steering wheel unless someone has put an after market steering wheel on without the horn.