is it a powershift or direct drive if powershift overhaul control valve probably an o ring or a seal or a broken spring is it a powershift or direct drive if powershift overhaul control valve probably an o ring or a seal or a broken spring
is check engine light on if so a Tobe is broken or valve is messed up, if not call mechanic its f***** up man.
You will probably have to cut it out with a hacksaw and install a new valve.
Broken valve spring
Plugged oil pump screen,plugged oil pump itself, broken drive shaft for the oil pump ,broken drive coupler for said pump. no oil in oil pan .plugged oil passages in engine block.
Loose, broken, or worn valve train component. Remove the valve cover to find the problem.
Bad valve? Broken piston ring? It could be a broken valve, but you would have other signs if that were the problem. Most likely it is nothing more than valve stem seals being bad.
Your engine will probably missfire and you will not have compression in the cylinder that has the broken valve spring because your valve will stay open.
In order to retrieve information from a drive that is been formatted and broken you will need to use two pieces of software. Use GetDataBack to access the broken drive and iCare Format Recovery to unformat your drive.
how to fix broken concrete drive way be repaired or does it have to be replaced?
If it's broken it will not steer.
could be broken valve collar or you have dropped a valve