Depends what parts. The 93 is first generation. The 03 is the second generation.
Very few parts will be compatible without extensive modification. Two different generations of S10, and two very different platforms.
Depends what parts. The 93 is first generation. The 03 is the second generation.
Not sure what an acurator is on that 03 S10, please try again.
Not very likely
YOU HAVE TO CUSTOME MAKE YOUR OWN KIT FOR A 4.3L S10
You have several O2 sensors on that vehicle and they are all threaded into the exhaust system at various points.
I have owned three s10 two 6cy one 4cy they all ran at max on the gauges asked all my friends they all said it was right
No it will not, It is all different. Actually yes it will i have to correct you om that i have a 96 blazer same front diff as an s10 and 96 to 03 are the same i just put a 2000 front diff in mine
on ebay search for NEW STARTER CHEVY 4.3L S10 BLAZER, C SERIES TRUCK 99 00 01 02 03 04 & ASTRO VAN this gives you an image.
I don't believe the 03 S-10 uses an etc (electronic throttle control) sensor.
Just paid 450 in buffalo ny for an 03 chevy lt parts labor and taxes included
Depends on the model. I personally have a 2003 Xtreme. Where as with the '03 there is two bolts on each side of the steering wheel. Take those out and the majority of the dash "faceplate" will come off.
i'd put them at around .03-.04 gaps on them. that's a pretty general spark plug gap.