0
Add your answer:
Earn +20 pts
Whats the difference between axil grease and rear end fluid?
Axle grease is used for the axle bearings that support the axle shafts. Rear end fluid also known as gear oil which is used in the rear differential to lube the ring and pinion gears.
Do front axle hubs on a 1984 Chevy C70 have grease or oil in them?
4x4 hubs will have oil.2 wheel drive will have grease
Do the bearings on a full floating axle need grease or are they oil bath?
they are oil bath, they get oil from the differential
How do you grease rear end in 2003 dodge ram 1500 slt?
There are no "grease" points on the rear axle. The gear oil is checked and filled through the plug in the differential cover.There are no "grease" points on the rear axle. The gear oil is checked and filled through the plug in the differential cover.
Does a 1982 Honda 185 atc have gear oil?
No, a 1982 Honda 185 does not have gear oil. The engine and transmission both use the same oil and draw from the same reservoir. The rear axle bearings are lubricated only with grease as are all other bearings.
Why do engines use oil and grease?
oil and grease is used in vehicles to reduce friction.
How do you fill the grease in a rear trans-axle on a 1995 Eagle Talon Tsi turbo and what type of grease do you use?
Oil 80W90 gear oil remove check/fill plug from differential and drain plug
Does oil lubricate motors?
Yes, oil is used to lubricate internal combustion engines. Grease is used to lubricate electric motors. =========================================================== I have always used non detergent oil in my ELECTRIC MOTORS and grease for the bearings if there is a grease fitting
Where do you find the grease fitting for the rear axle in a 1996 dogde Dakota 4x4?
There are no grease fittings on the rear end. Everything runs and lubes itself with gear oil that's in the rear end.
How many CC's of oil in forks of a 03 Suzuki JR50?
None, it just uses axle grease. no dampening at all just springs.
Where is oil filter located on 2006 sentra?
The oil filter is located on the engine between the engine and firewall, above the right front axle/swing arm.
Why do you use trichlorotrifluoroethane-soluble floatable oil and grease method?
The trichlorotrifluoroethane-soluble floatable oil and grease method is used because trichlorotrifluoroethane is a solvent that can dissolve oil and grease, allowing them to separate and float to the surface. This method is commonly used for analyzing and quantifying oil and grease in water samples, particularly in environmental monitoring and regulatory compliance applications. It provides a simple and effective way to measure the concentration of oil and grease in water samples.
