I would say the drve train would cause a vibration. A wobble could be from a bad tire, unbalanced tire, bent rim, bad tie rod joint.
could be a tire out of balance or vehicle out of alignment
cause its gay
One of the shocks on that side is probably bad.
yes, it does.
Loose universal joint(s) in drive train.
the star's size
The steering joints and connections are worn and need replacing Actually, the most likely problem is the tires. They may just need balancing. Sometimes the belts in the tires separate which causes a wobble. high/low spots in tires also causes a wobble. A bent rim can cause a wobble. Excessive negative caster will cause a wobble (alignment issue). Steering joints (inner and outer tie rods will not cause a wobble)
It Can Cause The Rocket To Spin Out, and/or wobble of course
Yes is can.
Things that might cause a pulley to wobble: The pulley is bent. The shaft the pulley is on is bent. The pulley is mounted crooked.
play in the drive train
To replace the wobble box on a 489 haybine, first ensure the machine is turned off and disconnected from power. Remove the drive belt and any guards or covers to access the wobble box. Unbolt the old wobble box from its mounting, disconnect any attached components, and then install the new wobble box by reversing the removal process. Finally, reassemble any guards and reconnect the drive belt before testing the machine to ensure proper operation.