yes
All that you do if put the shifter in the four wheel drive position.
check vaccum lines on differential or by shift linkage
It may have the original transfer case that was recalled
put trans in neutral and put 4wheel in gear then go to drive in stop mode only
If it has 4wheel drive, put it in neutral on the 4wheel drive shifter and put the regular shifter in 4th gear, if not I cant help you.AnswerIf it has 4wheel drive, put it in neutral on the 4wheel drive shifter and put the regular shifter in 4th gear, if not I cant help you.
You need to have the abs checked for codes. Then you can diagnose cause.
no they are a sealed bearing any attempt to install single bearings would not be safe or suggested (gm tech)
To engage 4-wheel drive (engine running), you should put the transmission into "Neutral" and manually engage it with the manual transfer knob located to the left of the auto/manual shifter. up/left is 2wheel "high", down/left is 4wheel "high", up/right is transfer case "neutral", and down/right is 4wheel "low". Once you engage your setting selected, look for a green "I" like icon in the bottom right ofyour gauge cluster showing that you are in 4wd. You may have difficulty making this icon appear, just hold brake and move your shifter into drive then into reverse and back to drive. If you cannot achieve engagement, contact your nearest service technician.
My f150 shifts from 2wheel to 4wheel on the fly, but to use 4low you need to be stopped with your transmission in neutral to engage the low range in my transfer case.
No they make a 2 and 4 wheel drive.
Yes