What does a remote starter have to do with the wipers? Just turn them off when stopping the car, and then when you use the remote starter, the next time, the wipers will not come on. If the wipers are not on then they will not work, no matter if you are using a remote starter or not.
The factory alarm can not be disabled. It can only be reset by unlocking the doors with the key or use the remote.
The factory alarm is reset by unlocking the doors with a key or use the remote.The factory alarm is reset by unlocking the doors with a key or use the remote.
you have top use the factory remote or unlock the driver door with the key.
Use your key ion the door turn it back then forth..den the alarm will stop
Use your remote to press disarm or enter the key provided by the factory.
If you no longer have the remote key you will need a transponder (chip) key. You can get one from the dealer, or there are some other places that sell them. You will have to use that key in the Drivers door to unlock the door and this will disarm the alarm.
You should be able to use your key to unlock the driver's door to deactivate the alarm or to use the remote control. If neither works, there is a button in between the AM/FM and CD button on your Honda stero, and holding it down will deactivate the alarm.
If you armed your car and lost remote but just want to use spare key to start it. unlock door alarm will sound. get inside close door. wait until alarm shuts off. after about 10- 15 seconds. start car. If car does not start wait for alarm to cycle. then try to start again. Once started your alarm will never bother you unless you use remote to arm it. I have been without remote for 2 years and no alarm problems.
Use the key to unlock the driver side door. This will reset the alarm and the starter cutoff. i took the modul that chimes for doors out and mine stop the alarm.
To disable the alarm system on the 2002 Honda Odyssey, just use the key fob to turn the system off. You can then use your vehicle's manual to learn how to disable the passive alarm system. This generally involves a series of steps that include turning the ignition key on and off and honking the horn.
Another issue is to disable the alarm when attempting to jumpstart a dead battery. The alarm will come to life and sound when jumper cables are connected to the battery being used to jump the vehicle. The solution is to connect the jumper cables, and while the alarm is sounding, insert the key in the door and manually unlock the vehicle. The alarm will go off, and you can continue to jumpstart the battery. Don't use your key or remote pad, press the lock button from the inside of the car before closing the door.