No difference in the replacement procedure.
most of the time your pads are about gone
You have a problem with the ABS system. Your brakes will still work properly but you will not have the extra safety of ABS. Have this checked out.
Why do brake pads squeak after replacing pads?
How do you clear the abs light on a Ford E-150 van year 2000. Light stayed on after replacing the front brakes.
you might have a bad speed sensor or a bad front wheel bearing causing the light to go onTRy replacing the sending unit they go bad very often turning rotors and replacing pads is not the way to fix this. it is the abs sending unit and it needs to be replaced.the correct part you will need to replace is called the wheel speed sensor not sending unit
too warn you that something is wrong with the brakes like you need calipers or pads
The brake warning light
It is not as easy and it is probably necessary to get a manual on your car from AUTOBOOKSONLINE.COM.
Maybe when you changed the pads some fluid came out of the ABS reservoir that is in behind the drivers' side wheel well. Did the traction contol light come on too? Sometimes you just have to unplug the ABS relay and plug it back for the light to go out, that is behind the cowling in the drivers' side wheel well too.
It is probably the ABS controller under the hood, replacing it with a rebuilt one should clear the light and give you full function brakes again.
The ABS light might stay on because of a sensor issue. The braking system of most vehicles has several sensors that can cause the light to come on and stay on. This could also be a problem with brake pads or calipers.