For hydraulic cams:
With #1 at TDC, adjust 1,2,5&7 intake and 1,3,4&8 exhaust for zero backlash plus 1/4-1/2 turn preload, then rotate engine one revolution for #6 at TDC and do the same thing with the rest of the valves.
For solid lifters follow the same procedure except use cam manufacturers backlash specification and 0 preload. If block or heads are made of aluminum, allow a few thousands extra backlash cold and recheck hot.
For hydraulic cams: With #1 at TDC, adjust 1,2,5&7 intake and 1,3,4&8 exhaust for zero backlash plus 1/4-1/2 turn preload, then rotate engine one revolution for #6 at TDC and do the same thing with the rest of the valves. For solid lifters follow the same procedure except use cam manufacturers backlash specification and 0 preload. If block or heads are made of aluminum, allow a few thousands extra backlash cold and recheck hot.
they could have either 1.94 intake 1.50 exhaust or 2.02 intake 1.60 exhaust
Please define SBC? In automotive terms, which is the category you posted this in, what does SBC stand for?
SBC Rizal was created in 1901.
SBC Telecom was created in 1999.
yes
Yes.
SBC Global stands for Southwestern Bell Corporation Global, which was a telecommunications company that later became part of AT&T.
SBC Rizal's motto is 'Fides, Scientia, Virtus'.
SBC Long Distance was created in 1996.
SBC Publishing Building was created in 1983.
yes but it has to be 83 or newer