0
350 small block Chevy Bored .030 over
Lunati Bracket Master 2 Cam 292/480
3998993 72-73_307/350_76cc chambers Heads
Gm Aluminum 4 Barrel Intake - 14014432 (Corvette) 80_L48 and the L82
Accel High proformance HEI distributor
Accel HEI Super Coil
I need To know where to set the timing?
What else can I help you with?
What should the timing be set on a 1977 350 sbc?
8 to 10 degrees BTDC / before top dead center.
Will a 350 sbc bolt to the same transmission as a 400 sbc?
yes
Will a sbc 350 starter motor fit a sbc 400?
Yes.
Will a sbc 350 flywheel fit sbc 400?
yes but it has to be 83 or newer
Are sbc 350 pistons and sbc 400 pistons the same?
No. Standard 350 engines have 4.00" pistons, standard 400 pistons are 4.125".
Will a 350 sbc tune port injection fit in a 400 sbc?
It should work well.
What is the horsepowerof a 1972 sbc 400?
its about 350
What machining do you have to do to put a 400 sbc crank in a 350 sbc?
The main journals need to be turned down.
What is the initial timing for a 72 sbc 350?
The initial timing for a 1972 small-block Chevy (SBC) 350 engine is typically set between 4 to 12 degrees before top dead center (BTDC) when using a vacuum advance. However, the optimal timing can vary based on engine modifications, fuel type, and overall engine condition. It's best to consult the specific vehicle's service manual or timing specifications for precise settings. Adjustments may be made based on performance preferences and engine tuning.
Can you swap a sbc 305 to a sbc 350 into a 1987 Chevy pickup and what else do you need to change?
YES. That is a direct bolt in.
Where are the coolant drain plugs on a sbc 350 block?
There are none.
Will a 350 sbc fit a 66 Chevelle?
Yes. No problem.
