most liquids, including water are approxiamately 8 pounds per gallon. 250 x 8 =2000 pds.
2000# plus the weight of the tank itself would be a good rough estimate. While not exactly the same weight as water should be close to same-8# per gal.
No, 250 grams of water is a measure of mass (weight) while 250 milliliters of water is a measure of volume. The weight of water will vary depending on the temperature and pressure, but 250 milliliters of water will always have a volume of 250 milliliters regardless of external conditions.
60 tons of water is equal to approximately 7,525 gallons.
If you add 1 gallon of product to 50,000 gallons of water, the ratio of product to water is 1: 50,000. To find out how much product to add to 250 gallons of water, you would need to apply the same ratio, which would be 1/50,000 x 250 = 0.005 gallons of product.
The weight of water is approximately 8.34 pounds per gallon. Therefore, 250 gallons of water would weigh around 2,085 pounds (250 gallons x 8.34 pounds/gallon). This calculation assumes the water is at a standard temperature and pressure.
Only if you have pure water in mind, then:0.25 liters or 250 milliliters of pure water weigh 250 grams.
0.06 gallon
0.06 gallon
well.... a 250 gram weight and 250 milliliters of water
This question cannot be answered sensibly. A gallon is a measure of volume, with dimensions [L3]. A pound is a measure of mass, with dimensions [M]. Basic dimensional analysis teaches that you cannot convert between measures with different dimensions such as these without additional information. It takes only a little mental effort to compare a gallon of air and a gallon of treacle to see that the two will have very different masses.
There are approximately 3.785 liters in a gallon. This would mean there are 15.14 250 ml (milliliters) in a gallon.