Wiki User
∙ 15y agoit is a diagram of the engine?
Wiki User
∙ 15y agoin the manual it says to use Mopar Automatic Transmission Fluid or equivalent labeled Dexron II or Mercon Quadra-trac 1.2L Select-trac 1.3L Command-trac 1.0L train and fill plugs recommended tightening torque is 30 to 40 foot-pounds i got all of this out of my 1993 Grand Cherokee owner's manual
No.
The 1993 Jeep grand Cherokee brake light switch simply plugs in and out. The brake light switch is located beneath the dashboard on the drivers side of the engine compartment.
Dirty spark plugs can occur on any make, model, or year. Changing the spark plugs should be done for maintenance, such as when you do a tune up.
The firing order is 1-5-3-6-2-4.
V8, 1-8-4-3-6-5-7-2 I6, 1-5-3-6-2-4
I own a 2006 3.7L grand Cherokee and my tune up consists of spark pug replacements (6) for me, differential fluid change, ATF fluid change (no flush), and PCV. If you have a transfer case you will need to change that as well. good luck!
bad plugs
Beneath their coils.
The plugs are under the coil packs that are on the passanger side of the vehicle. This is of course if you have the 4.0 engine. I would need to know more about your vehicle to gie you the best answer.
Generally I change platinum plugs at 100K and regular plugs at 50K.
There are three on the left, three on the right, and two on the rear.