0
I think yours is the model with the circular float bowl. So check:
Solenoid is OK probably is.
Float floats probably does.
Float needle seals probably does.
The O ring on the vertical fuel spiggot is probably not in the correct position.
If the float bowl has been taken off trying to get this O ring into the correct position is
very difficult. You need to take the carby off to ensure correct assembly.
Also always turn the fuel off.
What else can I help you with?
What is the correct clearance of valve intake of kawasaki barako?
the standard valve clearance for kawasaki barako is 0.08mm for intake and 0.10 for exhaust
What is the valve clearance of kawasaki 175?
The correct valve clearance for kawasaki 175 is 0.06mm for intake and for the exhaust is 0.08mm
Clearance of intake valve of kawasaki barako 175?
for barako 175 for me much better is 0.03 for intake and for exhaust is 0.07
Where at on the motor is the serial number on a kawasaki jetski engine?
on top the intake on the case
What is the valve clearance for the exhaust and intake on a 1988 Kawasaki bayou 220?
you can go to kawasaki.com and click on my kawasaki and you should be able to get all specs needed
What is the correct valve clearance for a 1989 kawasaki bajou?
.003 intake and .005 exaust
What is the correct valve clearance for 1994 kawasaki bajou 300?
.007 to .009 on the intake .009 to .011 on exhaust
What are the valve adjustment specs for a 1986 kawasaki zl 600?
Intake is .13-.18mm Exhaust is .18-.23mm
What is the valve clearance on a kawasaki brute force 750 2007?
intake 0.10 exhaust 0.20 engine cold
What is the valve adjustment for a 1994 Kawasaki bayou 400?
INTAKE .006-.007 IN EXHAUST .008-.010 IN
What is the valve lash on a kawasaki prarie 360?
0.15-0.20mm / .0059- .0079 exhaust 0.08-0.13mm / .0032-.0051 intake
What is Valve clearance on a 2006 kawasaki kfx 400?
0.09-0.18 mm intake 0.20-0.29 mm exhaust ...............Coffey Can Fix It
