Any amp will power a 15" sub. What you need to know is what is the RMS of the 15" sub. Lets say its 200 watts RMS than you will want a max of 200 watts for your amp.
RMS is the max watts its recommended to run on, for example i got 2 15's that are 3000 watt rms so i got a 2500 watt amp. You don't want to get too big of an amp because it will put stress on the speakers and wont last long.
You can safely connect up to 10 70-watt lights on a 15 amp circuit. Each 70-watt light draws 0.58 amps, so you would not exceed the circuit's 15 amp capacity with 10 lights.
Yes the z2x820 will do the job with no problem I have one hooked up to two 15'' in bridged mode and they HIT HARD!!!.
A 15 amp circuit can handle approximately 8-10 60 watt bulbs. Each 60 watt bulb draws 0.5 amps of current, so you divide the circuit's amp rating (15 amps) by the current draw per bulb (0.5 amps) to get the approximate number of bulbs it can handle.
your question is very badly phrased... you dont install a pedal onto an amp. but if you mean you want to use a guitar pedal on a 15 watt amp, of course you can!
Yes, you can use a 250 watt bulb with a 15 amp switch. The switch is rated for up to 15 amps, which is more than enough to handle the power of a 250 watt bulb. Just make sure that the wiring and other components in the circuit can also handle the load.
Yup :)
a 220 volt, 3200 watt oven will draw under 15 amps, so yes a 2o amp breaker will work.
It will draw over 18 amps and will blow a 15 amp fuse.
low like 15 rms 30 peak per speaker aftermarkets start at 50 rms per speaker
Yes, you can use up to 25 amps on a 3,000 watt generator.