lift the top latch and remove cyl.
The Iver Johnson viking was made between the years 1964-1978.The value of this firearm in the condition in which you describe is 200 dollars.
The Iver Johnson Viking 67 is a .22 LR revolver that was produced in the 1970s, specifically from 1972 to 1978. To determine its exact age, you would need the specific serial number, as that can help pinpoint the manufacturing year. Without that information, you can generally estimate that any Iver Johnson Viking 67 revolver is at least 45 years old as of 2023.
a good qualified gunsmith should be able to answer your question for you.
To disassemble an Iver Johnson Hammerless .32, first ensure the firearm is unloaded. Next, remove the grips by unscrewing the screws on either side. Then, locate the pivot pin or screw that holds the cylinder in place and remove it, allowing you to take out the cylinder and ejector. Finally, you can further disassemble the internal components as needed, but be cautious and refer to a detailed manual for specific parts and reassembly instructions.
Iver Johnson was created in 1871.
Iver Johnson ended in 1993.
The Iver Johnson Viking is a classic firearm known for its historical significance and unique design. If you're seeking information on its availability or current value, it varies based on condition and market demand. Collectors often appreciate it for its craftsmanship and the brand's legacy in American firearms history. If you have specific queries about its features or use, feel free to ask!
Iver Johnson Champion$200.
Remove the screw, tap lightly
need picture of Iver Johnson 22 mag riffer need picture of Iver Johnson 22 mag riffer need picture of Iver Johnson 22 mag riffer need picture of Iver Johnson 22 mag riffer need picture of Iver Johnson 22 mag riffer need picture of Iver Johnson 22 mag riffer need picture of Iver Johnson 22 mag riffer need picture of Iver Johnson 22 mag riffer need picture of Iver Johnson 22 mag riffer
My iver johnson has the serial # on the trigger guard
If your revolver is an Iver Johnson Viking, it is a top break revolver. Holding the revolver in your right hand (finger OFF the trigger) use thumb and forefinger of left hand to grasp barrel latch (between back of cylinder and hammer) lift the latch, and revolver breaks open. If this does not work, take it to a gunsmith.