To make a 10 vol peroxide solution from a 40 vol peroxide solution, you would need to dilute the 40 vol peroxide solution by adding three parts water for every part of the 40 vol peroxide solution. For example, mix 1 part 40 vol peroxide with 3 parts water to achieve a 10 vol peroxide solution.
Equal parts distilled water & 40 vol peroxide.
To make a 20 vol peroxide solution from a 40 vol peroxide solution, you need to dilute the 40 vol solution by mixing it with an equal amount of water. This will effectively reduce the concentration of the peroxide solution by half, resulting in a 20 vol solution.
To create a 20-volume peroxide solution from a 40-volume peroxide solution, you can dilute the 40-volume solution with an equal amount of water. Mixing one part of the 40-volume solution with one part water will result in a 20-volume solution. Make sure to mix thoroughly for accurate dilution.
flashlightning 30 vol. or 40 vol.
No, 10 is half as weak as 20 volume.. if you mix them equal parts you'll get a weak 15 volume...if you need 30 volume and only have 10,20 mix your color with just less than 2 parts 20 as in 1 oz color 1 3/4 oz 20 volume this will give you just less than 40 but it will be soupy...just spend the money and get 30. hope this helps. Craig NYS cosmetologist
No and its surely poison sharjk says I have used it for a year i seem to think it is whitening my teeth but i use 40 vol
Equal parts of 30 volume + 40 volume developers= 35 Volume Developer.
Yes, you can dilute 40 volume peroxide by mixing equal parts of 40 volume peroxide and water to achieve a 20 volume solution. For example, mix 1 part 40 volume peroxide with 1 part water to create a 20 volume peroxide solution.
To prevent major damage and breakage, use 30 vol. instead.
If you mean OREOR® Creme Developer and other brands the main difference is the name on the bottle. For the most part the ONLY difference between developers is what strength (Volume) the developer is. Standard developer is 20 Vol. (6% peroxide) they have Extra Lift 30 Vol. (9% Peroxide) High Lift 40 Vol. (12% Peroxide) And Low Lift 10 Vol. (3% peroxide) and No Lift 5 Vol. (1.5% peroxide) and each is used for a different purpose - Gray coverage, high lift tints, bleaching, streaking/highlighting, tint backs, semi permanent colors and toning. And as long as the correct Volume is used they are interchangeable. That being said: Dedicated Developers are recommended because they have the correct consistency (thickness) special conditioners and or buffers and correct pH for the product being used. All of which can improve or enhance the product performance. For example: most Creme Haircolors DO NOT have a thickening agent in them like most liquid or gel colors so, if you use a developer that is too thin or liquid it will make the product runny. Also, if your color requires a certain pH to give the proper result using any other developer may result in less than ideal hair condition or may cause premature fading. Hope This Helps. Good-Luck!!
It won't give u exactly 30 more like 35 vol if u mix 20 and 40. If u want closer to 30 put a little more 20 then 40...