0
Why should the position of a tie rod be marked before it is removed?
Wiki User
∙ 11y ago
So you can put the new rod end in the correct position, or as near as possible. I degrease the old rod before removal and spray a dabof primer paint right on the end of the lock nut. This way, when the new part goes on, i screw it right up to the pint mark.
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
Where is the right spot to add freon to a 2000 ford f-250?
On the low side. There should be two caps, one marked with an H and one marked with an L. Use the one marked with an L
How should you position security cameras for maximum effectiveness?
you should position at an angle so you can see more but if it a rotating camera the position it in the middle of what you want 2 keep under survailence
Pregnant women should avoid being in a supine position for more than 5 minutes?
TrueIt is safe to be in the supine position in the first trimester and part of the second. After that, it is best to be in a side-lying position.
Where should you look for the problem if your sunroof stopped in the open position?
Fuse box.
How do you describe your room?
Size, shape, position, colour and contents should do fine.
How do you change rails on a pool table?
The rails should never be changed on a pool table as each is marked and perfectly squared at the factory for its position on the pool table it was made for. However, the rails can be removed to replace the rubber and to re-felt. It is important that each rail be re-installed in the same location that it was removed from. The rails are secured with large screws or bolts and can be removed easily.
Should the US Constitution be amended to give voters the right to recall an officer in the legislative branch executive branch or judicial branch before the officer's term expires?
Yes; there should be a recall if that person in that position is not doing the job correctly or does not know anthing about how the job should be performed then they should be removed from that job. I could not imagine someone taking a position that they know nothing about. Surely this person should have had some experience in this filed before even running for this position.
Which component should be removed before cleaning a laptop?
battery
Why Should drive shafts be marked before dismantling?
so they can line it up after it it is took out
What should you do before disconnecting the ECU's?
make certain that power is removed
Should you remove the black bit on a prawn before cooking?
The full intestinal track of prawns should be removed before cooking
What part of a machine should be in position before it is turned on?
The lathe
How can i test a crankshaft position sensor?
With sensor removed the business end should be magnetic. While the sensor is disconnected and removed, probe the two pins for resistance with an ohm meter. The circuit should not be open.
What should the Anchorline be Sucured to before the Anchor is thrown over the side of the vessel?
it should be in correct position before throwing it out
My son had a cyst that was removed on his neck it was benign now another one has developed on top of his head should i be concerned.?
Yes, if he had a cyst before that was removed, it be should be checked out by a doctor.
What should be removed first before removing top cover?
remove guy ropes
Which soil horizon should be removed before any fondation forming is accomplished?
a horizon
