0
What else can I help you with?
What type of heat transfer is responsible for the formation of sea breeze and land breeze?
convection
The process of heat transfer thought to be responsible for the movement of the lithospheric plates on the surface of the earth is?
you are on odysseyware arnt you
How hot can an average kiln get in Fahrenheit?
A average kiln can get very hot just about to 2000 degrees Fahrenheit. It can be that hot and it can not get any hotter, that is the limit and maximum heat.
Why did The World Trade Center collapse?
Al Qaeda terrorists, masterminded by Osama bin Laden, are responsible for the tragedy. Two commercial jets filled with 10,000 gallons of jet fuel crashed into the World Trade Center towers, cutting off all the elevators and severely damaging the structure of the building. The fire alone couldn't have melted steel, but the fire with the pressure from above, bent the support structure that was damaged by the jet. Once one floor collapsed, the rest followed.
Why does air temperature change as altitude increases?
It get's colder as you travel up into the atmosphere because the ozone layers block away a lot of heat. But once you get to the tropsphere layer te temperature is about 1,600 degrees because the sun goes throught that layer first, and that layer is about 500 kilometer's thick.
What is solar orientation?
The alignment of a building relative to the sun, initially set either for maximum or minimum heat gain, depending on the local climate.
What is the retention of heat from the sunlight called?
The retention of heat from sunlight is called solar heat gain. This refers to the process by which a building absorbs and retains heat from the sun, typically through windows or other building materials.
How do you size an air conditioner for a building?
Determine the Heat Load or Gain for the building in btu or tons and choose an air conditioning system capable of removing the specified amount of heat given in the load calculation.
How effective are window films in reducing heat inside a building?
Window films are effective in reducing heat inside a building by blocking a significant amount of solar heat gain. They can help lower energy costs and improve comfort by reducing the need for air conditioning.
Which rays of the sun brings maximum heat why?
The infrared rays of the sun bring the maximum heat because they have a longer wavelength and higher energy compared to visible light and ultraviolet rays. When these rays reach the Earth's surface, they are absorbed by objects and converted into heat energy, which is why they are responsible for warming the environment.
How do you calculate btu per square foot?
Divide the heat loss or gain obtained by the load calculation by square footage of the building.
What is the difference between heat gain and heat loss?
These are exact opposities - heat gain is an increase in energy that results in an increased temperature of the material. Heat loss is a loss in energy that results in a decreased temperature of the material.
Insulation is used to prevent this type of heat?
Insulation is used to prevent heat loss or heat gain, depending on the desired effect. It helps to maintain a constant temperature inside a building by reducing the transfer of heat through walls, floors, and roofs.
Is evaporation heat gain or heat loss?
For what?It requires a heat gain for the water,but a heat loss for whatever the water is in contact with.
Can heat be negative?
Sure, if one object loses heat, another will gain it.However, it might then be called heat gain.
Is precipitation heat loss or heat gain?
heat loss
What is the maximum heat input from a gas burner on a fire tube boiler?
The maximum heat input is about 200 kelvin.
