It's located on the end if the main power wire coming off the alternator. This wire connects to the starter. The fusible link is located on the starter end of the wire.
You failed to mention what year the S10 is but, most of them use a fusible link to protect the alternator circuit.
how do you change the alternator on a chevy 2006 hhr
The fuse between the battery and alternator is a fusible link in the small wire that hooks up to the battery terminal along with the regular battery cable. It looks like a thick spot in the wiring. To replace, the cable must be replaced. .
a 1 wire 100 amp alternator.
Yes. The vehicle they were installed in (and the options the vehicle had) would dictate the size/capacity of the alternator that was used.
where is the location of tensioner of 2002 3.1 L Chevy Malibu to adjust if replacing the alternator?
Remove the belt from your 1999 Chevy Malibu alternator. Remove the wiring harness from the back of the alternator. Remove the alternator retaining bolts. Reverse the process to install the new alternator.
Its in the alternator!
location of ecm on 1998 Chevrolet Malibu
There is a tensioning pulley that you can move to loosen the belt. Look at the belt diagram in the engine compartment to locate it.
in the Chevy Malibu forum
Alternator is not charging. Have it tested and/or replaced.
the one closest to the alternator
if the amperage is the same and it has the same mounts.
You failed to mention what year the S10 is but, most of them use a fusible link to protect the alternator circuit.
I'm sorry, but WHAT DID YOU DO!?!?!?
It just cost me $350