0
The speed sensor is on the front passenger side of the car. Loosen the nuts on the wheel, then jack it up. remove the wheel. As you look where the wheel was, to your left is the speed sensor. It is at an angle, angled towards the back of the car. first unhook the wires attached. you can do this by hand. next, remove the bolt that is holding the speed sensor on. I believe it is a 10mm, and you will need a deep socket. once you remove the bolt, the sensor slides right out. Also, make sure you replace the "O" ring on the sensor. this is an easy job.
Still curious? Ask our experts.
Chat with our AI personalities
Coach
Maxine
ViviAdd your answer:
Earn +20 pts
How do you find a diagram on the intenet for the rack and pinion of a 1993 Chevrolet Lumina?
On the internet? Not very likely. Go to a library as they will a lot of times have books with diagrams and how-to's.
How do you remove gm input speed sensor?
replacing speed senor is not a hassle. all you have to do is find SPEED SENSOR, all cars are different, in my honda theres 4, i have replaced two already. speed sensor should be on transmission. remove bolts and pull out. simple put in new sensor.
Where can you find a diagram of the steering assembly of a 1990 Chevy Lumina APV?
The best place to find a schematic for the steering column is in a FACTORY SHOP MANUAL available from AUTOBOOKSONLINE.COM or MOTORLIT.COM.
Where is the map sensor on a Fiat?
You can find the map sensor behind the passenger side dashboard. You will need to remove the glove box in order to access the map sensor.
Find pict's of disassembly for 89 Chevy ignition?
The 1989 Chevrolet ignition assembly can be obtained from most Chevrolet dealerships. Most auto-parts stores will make the pictures available.
