There is a sticker under the hood that tell you what oil to use .
Shell 5-40 wt
According to the 2003 Ford Focus Owner Guide ( North America ) ( 5W-20 )
Emission diagram for 1996 ford thunderbird 3.8l
to replace main bearings u need to remove engine from vehicle, u also about need to completely dismantle engine. pretty much, if asking this question in here, it is not a job for you to undertake. and i say that in the nicest way, no offense intended
Yes the timing chain position marks for engine 4.0 ford explorer eddie bauer
To replace the rear window hinge on a 2003 Ford Escape, the correct part numbers and names can be found in the owners manual of the vehicle. The information can also be found by contacting a local dealership. The pin holding both hinges will need to be removed and replacement of both hinges and pins is recommended.
You need to replace an engine for a Ford F250 Triton 10 2005 for about $3000.
So what is your question, or need to know?
With engine oil filter change : ( 6.0 quarts / 5.7 liters ) for the 5.4 liter V8 engine in a 1997 Ford Expedition
Do we need special tools to install the timing chains on 2003 ford f150 4.6 engine
Do you really need to change your timing CHAIN on a 2003 Ford Ranger 3.0 L already ? How many miles have you got on it ?=)
( 6 quarts ) WITH ENGINE OIL FILTER CHANGE , according to the SVT supplement for the 2003 Ford F-150 lightning
That would depend on which engine you have in your 2003 Ford Excursion : The 7.3 liter diesel engine doesn't use any spark plugs The 5.4 liter V8 engine has ( 8 spark plugs ) The 6.8 liter V10 engine has ( 10 spark plugs )
If you have the original Ford plugs, you only need to replace them every 100,000 miles.
The 4.6 or 5.4 Triton engine has two timing chains.....not belts. Periodic changing isn't necessary like it is with a belt driven timing setup.
we found out that we need to press the ignition "reset button" where is this?
I was looking at the 2003 Ford Explorer Owner Guide and it shows : That you don't have to use synthetic or synthetic blend engine oil Just use ( 5W-20 ) engine oil in the 4.6 liter V8 that meets Ford specification ( WSS-M2C153-H ) certified for gasoline engines
According to the 2003 Ford Escape Owner Guide : With engine oil filter change : The 2.0 liter " Zetec " four cylinder engine takes ( 4.25 liters / 4.5 quarts ) The 3.0 liter " Duratec " V6 engine takes ( 5.2 liters / 5.5 quarts )