16 mm
The oil drain plug uses a 13 mm wrench.
The oil drain plug on the 2002 4cyl Pontiac Grand AM is situated about 18 inches away from the front right wheel mounted in a horizontal position toward the back of the engine. It is a #15 size metric screw.
on v-6 the oil filter is the drain Dude . . . the oil pan drain plug is near the oil filter on the passenger side very close to the transmission bell housing. Removing the oil filter will drain some of the oil, sure, but if you want to empty the crankcase you will need to pull the drain plug. Check your manual for the correct torque to use when replacing the plug and don't forget to use a new gasket. There is no drain plug for the transmission pan so this is kind of hard to screw up. Just check your fluid levels after draining the oil if you're concerned you might have emptied the wrong thing. As always, I am not a mechanic and your mileage may vary. .
the proper gap size for all vin. #'s of 2003 Chevy and gmc suburbans is 0.060 as per the Chevy owners manual. I have a 2003 Chevy suburban and I am replacing my plugs tomorrow, good day kind friend. Danny Romero Louisiana
I think it's a 17mm....if I remember correctly. Maybe a 16mm.
17mm it is.
The original engine oil drain plug wrench size would be 15mm.
Factory plug is 13mm.
14mm
Use a proper size box-end wrench or socket to remove the oil drain plug
More than likely 17 mm.
its a 17mm size bolt at bottom of engine
The 2002 Chevrolet Suburban has a V8 engine.
Most GM veichles or metric. If i am correct its goingto be a 15 mm or 17 mm
The 2002 Chevrolet Suburban has a 5.3 L base engine size.
13 mm on my 2002 Ford Ranger 4.0 XLT