For the 3.0 engine it is 4.5 quarts.
Wiki User
∙ 2005-05-12 20:45:13underneth the intake underneth the intake
Low oil level or pressure Hydraulic lifter bad
You can find pictures of oil pumps at most Ford automobile dealerships. Many auto-parts websites will also have pictures of Ford oil pumps.
It should be just above the engine oil filter.
As per the amsoil website, 4.6 quarts!
Approximately 5 litres.
Oil is added as part of the charging procedure
According to the 2008 Ford Taurus owner Guide : With engine oil filter change : The 3.5 , V6 engine takes ( 5.5 U.S. quarts of 5W-20 )
Change the head gasket.
The 1997 Ford Taurus owners manual shows : for the 3.4 L - SHO engine 6.5 quarts ( 6.1 liters ) WITH FILTER CHANGE
I own A 1994 Ford Bronco Eddie Bauer with a 5.0 liter engine. The answer to your question is the oil capacity is exactly 6 quarts for an oil change.
It uses 10 Quarts
there is no oil pressure in my 1997 ford taurus, but the oil is full?
On a 1996 Ford Taurus : With engine oil filter change : For the 3.0 liter " Vulcan " V6 engine ( 4.5 US. quarts ) For the 3.0 liter " Duratec " V6 engine ( 5.5 US. quarts ) According to the Owner Guide
CAPACITIESEngine, with filter..........4.6 qts [1]Cooling System, Initial Fill..........12.0 qtsAutomatic Transmission, Total Fill4 speed AX4N..........13.0 qts 1. After refill check oil level. Hope This Helps.
In a 1995 Ford Taurus : ( 5W-30 is the PREFERRED engine oil for the 3.0 and 3.8 )
The motor oil that is recommended for a 2000 Ford Taurus is 5W 20. This oil can be purchased at any retail or auto parts store.