0
Add your answer:
Earn +20 pts
What type of oil do I use for an oil change on a 1997 Dodge Grand Caravan?
5w30 or 10w30
What type of oil should you use for a 1994 Chrysler Concorde?
5w30 or 10w30
What is the melting point and boiling point of beryllium ferinheght?
6 degrees
How is crude oil separated into different fractions?
you use fractional distillation! basically, all the different substances in crude oil have different boiling points, and the column which is used to do fractional distillation has stages with different temperatures. when the substance reaches its boiling point temperature in the column, it turns into liquid and settles there, away from other fuels.
What is the difference between SAE 30 oil and 10w30 oil?
Using the correct oil in your car is very important. The bearings in your engine are designed with very tight clearances that require a specific weight of oil running through them. The numbers on your oil indicates the oil's thickness. For example, SAE 30 weight oil is heavier than SAE 20 weight oil. So you are probably asking, "what is the 'W' all about?" The W indicates a multiweight oil, where the "W" indicates WINTER use. SAE 30 weight oil acts like a 30 weight oil at all temperatures. So when it gets really cold that 30 weight oil gets really thick. It will no longer flow through the tiny clearances your engine requires. An oil rated 10w30 will behave differently when it is cold. When the temperature of 10w30 drops it acts like a 10 weight oil. That way it will still be fluid enough to flow where it needs to flow. Once the engine(and oil) warms up to temp then it will act like a 30 weight oil.
What is the boiling point of almond oil?
The boiling point of almond oil is approximately 420°F (216°C).
What is the boiling point of crude oil?
Crude oil is a complex mixture of hydrocarbons with different boiling points. The boiling point of crude oil can vary depending on its composition, but typically falls within the range of 300°C to 400°C.
What is the boiling point of 30w oil?
The boiling point of 30w oil can vary depending on the specific composition of the oil. Generally, the boiling point of motor oils, including 30w oil, can range between 400-600 degrees Fahrenheit.
Oil for a Kia Spectra?
10w30 10w30
What is the Initial Boiling Point and Final Boiling Point of Furnace Oil?
The initial boiling point of furnace oil typically ranges between 250-300°C, while the final boiling point is around 400-450°C. These temperatures indicate the range over which the different components in furnace oil vaporize and are distilled.
What is the Boiling point of patchouli oil?
The boiling point of Patchouli oil is 287 degrees Celsius.That would be 548.6 degrees Fahrenheit.
Can you use oil bath for boiling point determination?
Yes, an oil bath can be used for boiling point determination as it provides a stable and uniform heating environment. By immersing the sample in the oil bath, you can accurately measure the boiling point of the substance while minimizing temperature fluctuations. Make sure to choose an oil with a boiling point higher than the substance being tested to avoid interference.
What is the ignition temperature of vegetable oil?
Vegetable oil reaches a smoke point before it reaches its boiling point. Its smoke point is around 495F and its boiling point edges up towards 572F.
What is the boiling point of motor oil?
It is impossible to list the boiling point of crude oil due to the widely varying boiling point of it's numerous compounds, some of which may boil at temperatures too high to be measured. Refined motor oil will boil at around 300 degrees Celsius (572 degrees Fahrenheit).
Would oil alter the boling point of water?
Oil is not soluble in water; the boiling point remain unchanged.
What is the boiling point of lubricating oil?
300-500 c
What is the boiling point of mineral oil?
260-330°c
