0
Add your answer:
Earn +20 pts
Is it possible to suck in water through the exhaust pipe if you try to start a stalled car with its exhaust still submerged?
No, it is not. BUT: Starting a car with the exhaust submerged carries other risks. By implication there are other things submerged that could be damaged by water, such as the alternator, HVAC, or transmission. Also, the engine may not start if the starter cannot overcome the water pressure.
what part of speech is the word soil?
Soil is a noun (the soil) and a verb (to soil).
Which soil is used to make pots?
clayey soil is the best soil for pottery
Why is the rain gauge partially submerged?
So you can see how much rain fell that day when it rained!
What is the density of modelling clay?
There is a wide variety of modelling clays: Mineral clays, are refined forms of the clay you may find in the ground, and are dense over two kg/lPolymer clays are much lighter, about 1 kg/land paper based clays can be very light, depending on their dryness.If you have an actual sample the best thing to do would be to measure it.
The density of a submerged submarine is about the same as the density of?
The density of a submerged submarine is about the same as the density of the fluid it is submerged in, which is typically seawater. This allows the submarine to float or sink based on its buoyancy and weight.
What is submerged density?
Submerged density is the density of an object when it is immersed in a fluid. It takes into account the volume of the object that is submerged in the fluid. This can be calculated using the formula: (density of object * volume of object) / (volume of object - volume of displaced fluid).
What is the difference between saturated and submerged soil?
when the voids of soil are just filled by water the soil mass is called saturated and when soil mass is submerged in water means the water level is above the the soil level or soil mass is drowned in water then soil mass is called submerged.
What fraction of a piece of concrete will be submerged?
The fraction of a piece of concrete submerged in water depends on its density compared to the density of the water. If the density of the concrete is greater than the density of water, the fraction submerged will be less than 1. If the density of the concrete is less than the density of water, the entire piece of concrete will be submerged.
What is submerged soil?
Submerged soil refers to soil that is completely covered or immersed in water. This can occur in wetlands, riverbeds, lakes, or other water bodies. Submerged soil conditions can influence plant growth, nutrient cycling, and microbial activity.
What type of soil will mangrove plants grow best in?
Saline submerged soil
Is bulk density influence soil texture?
Bulk density does not directly influence soil texture. Soil texture is determined by the relative proportions of sand, silt, and clay particles in the soil, while bulk density is a measure of soil compaction or how tightly packed the soil is. However, high bulk density can affect soil structure and porosity, which in turn can impact the ability of soil particles to interact and influence soil texture indirectly.
Is duckweed partially submerge or fully submerged?
No, it is a floating plant, i know you might argue that the roots are underwater while the leaves are above but actually that counts as a floating plant, or else water hyacinth and water lettuce are half-submerged too. Floating plants is a plant that has it's leaves above water and it's roots dangling in water, partially submerged is leaves above water but roots in the soil below water, completely submerged is the roots in the soil below and the leaves also below water surface. -LJTG
Is the cabomba plant a fully submerged plant?
No, Cabomba is a partially-submerged plant. It is rooted in soil at the bottom of the pond with its leaves, flowers, fruits on or above the surface of the water.
How do you get the weight of soil in an area?
To get the weight of soil in an area, you need to multiply the volume of soil by the density of the soil. The formula is weight = volume x density. You'll need to measure or calculate the volume of soil and know the density of the particular type of soil you are working with.
Why doesn't a rocks density change when submerged under water?
A rock's density remains the same when submerged under water because its mass and volume do not change in the water. Density is calculated by dividing an object's mass by its volume, and since both the mass and volume of the rock remain constant underwater, its density also stays the same.
If you are submerged in a liquid denser than water what will happen to the pressure?
If you are submerged in a liquid denser than water, the pressure exerted on you will be greater than the pressure you would experience while submerged in water. This is because the density of a liquid affects the pressure it exerts on objects submerged in it.
