0
What does it mean when Slip TCS off and Service Engine Soon lights indicate?
Wiki User
∙ 12y ago
What this usually means is that there is an ignition coil that is going bad or is bad. The TCS light will come on because one of the cylinders are misfiring. When the car senses this, it detects this misfire as "slippery conditions" and the TCS lite will engage.
Take it to an autozone and have them diagnose which cylinder is misfiring. Then replace the ignition coil for that cylinder. Dont let the fact that the engine has a cover over it scare you. A 10MM socket wrench will get that right off. Its only 4 nuts. Using that same size socket wrench will loosen the bolt that holds the ingntion coil intact to the engine.
Once you replace that coil, put that cover back on, you will be good to go!
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
If your gas pedal gets stuck what should you NOT do?
Do not shut the engine off. Instead, slip the shift into neutral and pull off to the side of the road, stop, put it in park then shut he engine off.
What causes your engine to become out of time?
loose bolt on distributer will allow distributer to move worn or stretched timing belt or chain can slip or jump out of timing broken tooth on timing gears If it's an older engine, with points, they just wear out.
Definition of a slip in pottery?
I think what you are talking about is "slip". Slip is clay in a liquid form. I have commonly used it for attaching pieces of clay.
How is a dip-slip fault different from a strike-slip fault?
Dip-Slip fault is a bedding fault and its pattern is En-Echelon, while Strike Slip fault is strike fault and its pattern is Parallel.
What is the name of wet clay?
Slip is a mixture of clay and water. It is used like glue to hold pieces of clay together.
What do the dashboard warning lights mean in a Nissan Murano?
2003 Nissan Murano "engine service", "VDC Off" and "slip" warning lights on. What does it mean?
What are two features that can indicate the presence of a fault?
ummm....?
Strike slip plate explain?
Strike-slip faults indicate rocks are sliding past each other horizontally, with little to no vertical movement. Both the San Andreas and Anatolian Faults are strike-slip.
Your maxima 2000 all the light service engine soon and slip and pcs comes on the engine knock and shakes a lot runs very stubborn it takes for ever to get up to speed?
Could be the o2 sensor going bad or fuel pump
2005 Nissan Maxima tcs slip light coming on?
what causes the engine light and the tcs and slip light to come on
What makes a 91 Toyota Corolla hesitate while driving?
2 possible obvious faults Ignition timing and\or transmission slip. Hard to say without knowing service history of the engine.
Why would both the Check Engine Soon and Slip lights come on simultaneously on a 2000 Nissan Maxima?
It sounds like one of your ABS wheel slip detectors got disconnected or became bad. Slip is detected by thes detectors on each weheel - if there is a difference between them it will alarm the slip light.Answerif you get the slip, tcs and SES..it means you need an o2 sensor Answerhad the same problem , turned out be a bad ignition coil, seems the computer gets mixed signals when engine miss fires,replaced coil slip light went out AnswerI have this same problem with my 2000 Max. Annoying because the slip and tcs and ses lights come on after the car is started and the car has not moved. I have not fixed the problem yet. Researching the cause and it seems there are lots of posts in the internet incriminating the ignition coils. Will changing the coils solve this problem ? AnswerI had a same problem with my 2000 Nissan maxima. I have replaced all 6 coils. I also have the same problem, has anyone tried changing the Fuel pump?
2001 Maxima GLE and the Check engine light and the TCS slip lights keep going off and on What would this be from?
I have a Acura 2002 TL and these both were flashing and my car just needed a tuneup and they went off and stayed off
What is the source document for health insurance claim data?
An encounter form also known as a charge slip, multipurpose billing form, patient service slip, routing form, superbill, or transaction slip.
Modifier -32 is used to indicate a service is mandated Which of the following is an example of a mandated service?
A mandated service would be something like this: your job requires you to have a drug screening before you are hired. They send you the lab slip. You go to the lab and have the required testing done. The lab would submit the testing with the correct codes and a modifier -32, for "mandated services", because you were required to have these services performed.
What a picking slip used for?
did you mean what is a packing slip used forAnother AnswerA picking slip is used by a warehouse worker to collect the items ordered and bring them together to the shipping post. The packing slip, then, includes the items ordered and collected and shipped, and may indicate items which are back ordered, or otherwise not included in a shipment.
Where can one find a lawyer for a slip and fall accident?
Many services are available to support those who have have an slip and fall accident. Some service such as First4Lawyers offer a no win no fee service and specialist lawyers available to handle your case.
