OBD I code 67 - Neutral Drive Switch Circuit Open ( key on , engine off )
it is a high voltage sensor...but i would like to know where it is located
An obdII code reader will tell you why the light is on and might tell you what is wrong
diagnostic code 42 is the code ford gives for a new vehicle required. too many discrepencies to consider a worthy vehicle
It means generally that there is something wrong in the engine bay. The best way to find out is have the codes read by buying a code reader yourself or taking it to an agency for an assessment. Good code readers cost about $ 100 but can save you lots.
To fix an engine light code of 133 on a 1996 Ford Bronco with a 351 engine, the oxygen sensors need to be replaced. There are two oxygen sensors on this vehicle. One is on the driver's side and the other is on the passenger side of the exhaust or catalytic converter.
There is no 1988 Ford Explorer. The vehicle went into production in 1990 for the 1991 model year, replacing the two door Bronco II;. As for the Bronco II, there isn't an OBD port.
According to the ( 1996 ) Ford Bronco Owner Guide : Axle code ( 19 ) is a Ford conventional ( non Ford Traction Lok / limited slip ) axle with a 3.55 ratio
OBD I code 67 - Neutral Drive Switch Circuit Open ( key on , engine off )
eBay Motors and Auto Trader are the best places to find used or second hand Ford Bronco II vehicles. AOL Motors has several listings for the Ford Bronco II with a search by state, price or zip code.
No, the Ford Bronco's vehicle body classification code lists it as a utility, which makes it an SUV. However, it as aggressive and powerful a platform ever made in it's class, which makes it easily mistaken as a truck.
Something might be wrong. Have the code read to see the problem.
did you mean code P0140 ? this means o2 sensor no activity( bank 1 sensor 2) in other words replace the O2 sensor. hope this answers your question.
Question needs to be more specific. If you are asking about a "check engine" light, the EEC connector under the hood provides access to the stored codes. It can also be queried with an OBDI code reader.
6 Quarts with filter change.
The eighth digit in the VIN (Vehicle Identification Number) is the engine code.
lack of heated o2 sensor switch, lean bank # 1