80 litres ========================================================= 5 quarts ( 4.7 liters ) with engine oil filter change
I would like to know the same thing, we have one over a oil tower(derrik) on the side of a river signed michel ardisson '82'
Oil pumps can cost from $80 to $200. It all depends on which vehicle you have.
I depends on engine you have in your car. All timing marks are located on the crankcase pulley, cam pulley and, distributor has timing marks as well. In order to view all timing marks, be sure to have the front bumper removed & timing belt covers removed. In order to turn the crankcase by hand. Have a bottle of whiteout ready to place on timing marks for easy refferance. Always crank your wrench clockwise during timing mark lineup, remove sparkplugs to lose the engines compression. Whatever you do, do not remove the timg belt until you have all refferance marks lined up. At the crankcase, you will notice a permant refferance marker, ture the crankcase until you see a small notch on front of the pully. Once you find it, view the timing marks for the cam pulley. if the notch mark on the pulley don't line up with it's own refferance marker, turn the crankcase till these marks line up together. If they line-up, remove the distributor cap from the distributor and check to see if the rotor button lines-up with the number 1 notch on the car's distributor. If so, it's time to replace the water pump, crankcase seals, camshaft seals and install a new thermostat. Be sure all the pulley are locked into place to keep from moving when installing the new timing belt. To save yourself any headaches, buy a factory manual that has all the torque specs when replacing everything.
The city Xiamen is one of the biggest producers of commercial oil paintings, or decorative paintings, in China, together with Putian in the same province, and Shenzhen, in Guangdong province. 80% oil painting reproduction or portrait paintings on world-famous online art gallery are painted by our oil painters in China. So, it is ok to buy from China.
10W-40 motor oil
Yes, oil should be put in the crankcase on a 1989 Suzuki RM 250. The proper oil to use for this is a product made by Standard Oil called 80-90W Gear Oil.
500cc of oil
PW 80 is a 2 stroke. It does not have oil in the crank case. I think you mean transmission oil. I use 10w40 engine oil in mine and it works great.
Yamaha recommeded 20/1
When owning and maintaining a recreational vehicle, it is important to know what type oil is needed to run it smoothly. For a 2003 Yamaha Raptor 80 SAE 10w40 type se motor oil is recommended.
fork oil amounts for a Yamaha GT 80 are 108 to 116cc's per fork tube. you should use 10w motorcycle fork oil. this is good for all years from 1974 to 1980.
this is directly from Yamaha i work at a dealership 5w oil is recommended 329cc or 90mm oil height
what year was the Yamaha raptor 80 introduced?
Sae 10w/30 "se" or "sf" motor oil
Your crankcase should hold a little under a quart of oil, but the exact amount is irrelevant beings there is a plug on the side of the case that will indicate when its full. Just unscrew the plug and fill it till oil starts coming out of the hole. Pretty simple.
For a 1988 DS 80 the crankcase takes 650ml of 10 w 40 - a nice lady at a Suzuki dealer looked it up for me.