0
What else can I help you with?
How do you replace a flex plate in a 2002 Pontiac grand prix?
The flex plate is bolted to the back of the crankshaft. It connects the motor to the torque converter in the transmission. To replace you remove the transmission and replace it.
What tectonic plates were involved in the China-India earthquake of 1950?
As the plate collided India's plate went under China's so when the pressure of china's plate bending could stand no more it popped back in to the normal position before the pressure built up on it.
What is the bell housing?
It is located between the back of the engine and the transmission. It houses the flywheel and clutch if it is a standard or the flex plate and the torque converter if it is an automatic transmission.
What problems do you look for when you are visually checking a pressure plate assembly?
Are the springs all in place and secure, surface cracks in the face of the plate, excessive burn marks. Generally it makes more sense to put a complete clutch kit in when you change the clutch. More money, but is saves having to do it again and should make the clutch last longer. No matter how good the pressure plate may look, it still has wear and may not have the pressure it should have.
Is the movement of a plate uniform or uneven along its boundary?
UnevenEach plate has several boundaries and exerts pressure in all directions, and the movement is rarely close to uniform.
What is the torque specs for the pressure plate on a suzuki samurai?
Pressure plate to flywheel torque is (ft lbs) 14 to 20.
What is the torque setting for a 95 s10 2.2 pressure plate bolts?
The torque setting for the pressure plate on the clutch for an s10 2.2 is 33 foot pounds. The torque for the 4.3 is 29 foot pounds.
What is the pressure plate and flywheel torque for a 1990 ford ranger?
Pressure plate to flywheel bolts - 24 ft/lbs
What are the Torque specifications for a clutch pressure plate on a 96 ford ranger?
pressure plate to flywheel bolts - 15 to 24
What is the torque spec for the pressure plate bolts on a 12.7l 60 series detroit?
55 ft lbs then 120 degrees 55 ft lbs then 120 degrees
What are the torque specs for 1985 Toyota 22R flywheel bolts and pressure plate bolts?
80Lbs for flywheel, 10 to 15lbs for pressure plate
What is the torque specs for the clutch on a Kia Sephia?
whats the torque spec for the pressure plate on a 1998 kia sportage?
Flywheel torque specs for 71 Datsun 240z?
What are the torque specs for a flywheel and pressure plate on a Datsun 240Z
How do you increase torque through the driven plate?
To increase torque through the driven plate, you can adjust the friction material or increase the number of friction surfaces on the plate. Additionally, increasing the pressure on the driven plate by adjusting the clutch mechanism can also help increase torque.
Torque specs for 1991 Toyota pickup v6 4x4 pressure plate?
Haynes Auto Repair Manual say's Clutch pressure plate-to-flywheel Torque should be 11 to 15 Ft-LBS Hope that helps....
Do you have to torque the bolts on your pressure plate for your 1986 Pontiac Fiero GT and if so at what lbs?
Yes, you have to torque everything on the drivetrain correctly. The manual calls for 15 ft-lb (dry and clean) on the pressure plate-to-flywheel bolts.
Pressure plate torque specification for Chevy 350?
In 1970, the rating was 35ft/lbs.
