intake is .002 to .004 exhaust is .006 to .008
how do i set the timing on a 1985 yamaha 200 3 wheeler
i have a 1985 Yamaha yfm 200, it is gas, no fuel/oil mix needed. just put in 93 octane. unless u have a 2 stroke then its usually a 50:1 or 40:1 mixture
50-55 mph
On a Yamaha Raptor, "YFM" stands for "Yamaha Four-wheeler Motor." This designation is used to identify the model series of Yamaha's four-wheeled all-terrain vehicles (ATVs). The "Y" indicates Yamaha, "F" denotes four-stroke engine, and "M" signifies a motorized vehicle.
no it is gravity fed
YFM 350SE Big Bear 4x49725x8x1225x10x12
I've got mine for sale right now...runs great with low hours on rebuild. Doesn't leak or burn anything. $450
The Yamaha YFM 250, commonly known as the Yamaha Blaster, was produced from 1988 until 2006. It is a two-stroke, single-cylinder ATV that gained popularity for its lightweight design and performance. If you are looking for a specific model year, please clarify, and I can provide more detailed information.
The "YFM" in the Yamaha Raptor 250 stands for "Yamaha Four-Wheel Motorcycle." The "Y" indicates the brand, "F" designates it as a four-wheeled vehicle, and "M" represents it as a motorcycle. The Raptor 250 is a sport ATV designed for performance and maneuverability.
Many bike owners find it easier to take it to a mechanic to get their valve adjusted. However, it is possible to do it yourself. You must set your engine at TDC on the compression stroke. You do this by inserting a small screwdriver in the spark plug hole. You will then be able to access the valve you need.
YFM was created in 1997.
yamaha kodiak 400 4x4 YFM 400 FAR i bout this atv and dont know the year of manufaturer date