it uses a brand by acdelco, and you have to order it from a dealer. its called auto trak 2. if you don't use this specific fluid it will mess up your transfer case, i learned the hard way. and they wont recomend it until you've already had problems , that's how they make their money, good luck, it runs about 6-10 dollars a quart.
The type of fluid required is written on the dipstick.
R134a
You most likely have low tranny fluid. Check and add proper type & amount of fluid.
Transfer printing is where the ink and paint is applied to an object and then the object is used to transfer the ink to the paper or material. Most printing techniques use the transfer process. You can use engraved plates, lithography, stone, lead type, etc. to transfer the ink, even a rubber roller that picks the ink up from the type sheet and puts it on the paper.
mudslide
That year requires--------DEXTRON VI fluid.
what type of power stering fluid do you use for 2004 chev silverado 2500 truck
The recommended transfer case fluid is a SJ-rated 5W30 viscosity oil. One example would be Amsoil 5W30 Synchromesh Fluid. The vehicle requires approximately 1.35 quarts of transfer case fluid.
R134A
Dextron II
Convection is a type of energy transfer that requires a fluid. It involves the movement of heated fluid, such as air or water, to transfer heat energy from one location to another.
Dextron II transmission fluid.
DEXTRON II automatic transmission fluid
what type of fluid does a john deere transmission transfer case use
Syn-torq synthetic transmission fluid or equivalent.
type of fluid for 5 speed manual transmission
It should be the orange Dex Cool.