0
Lug nut bolt broke while trying to get tire off how do you remove it?
Wiki User
∙ 12y ago
You may have to get a nut splitter, a grinder, or a hammer and chisel to get nut off and then have stud replaced. Hopefully the splines in the drum haven't been torn out and a new stud can be pressed in. If not, you might be running a lug nut short (which is not at all wise) or you'll have to come up with a new drum. Auto recyclers live for challenges like this.
Wiki User
∙ 14y ago
Wiki User
∙ 12y agoif broken stud is on disk, just knock broken peice out with a hamme. to reinstall place new one thru hole, using some washers as packing, attach wheel nut and screw tight to draw new stud thru hole until seated. then remove wheel nut and packing, if broken stud is in a brake drum, u need to remove the brake drum. then proceed same as for a disk
Add your answer:
Earn +20 pts
How do you remove a fan clutch on a 1997 S10 pickup 2.2L?
The fan clutch on a 1997 S10 has a bolt on the center of the front. Remove the bolt while holding the clutch still. There is a special tool to grab the clutch fan from the rear to hold it while removing the bolt.
How do you remove the spare tire on a 2002 ford ranger?
You will need a ratchet and a socket to remove it. You get under the rear of the truck and you will see the bolt and bracket holding the tire in place. Remove the bolt and the bracket hinges downward. You will need a ratchet and a socket to remove it. You get under the rear of the truck and you will see the bolt and bracket holding the tire in place. Remove the bolt and the bracket hinges downward.
How do you remove a broken crankshaft pulley bolt on a 1992 Honda Civic?
My bolt broke on my SB Chevy so I'm assuming your Honda can be fixed in a similar way. I drilled a hole in the bolt and used an extractor. Then, I had to re-thread the hole w/ a larger tap-die. So far it has held up - 1 year later. Hope that helps.
How do you fit vauxhall combo starter motor?
This is how to remove it..... fitting is same but in reverse. First, remove the battery, taking off the negative connection first. Remove the 4 bolts holding the battery tray in place (13mm socket) Underneath the car, at the back of the engine, remove the pozi drive screw holding the LT lead to the back of the solenoid, remove the top nut connecting the thick cable to the back of solenoid (I found this easier to do once the starter was hanging loose) Back above the engine, loosen the 19mm bolt that holds the starter motor to the gearbox (it's a tight squeeze to get access to it) Then back underneath, loosen the bottom starter motor bolt (14mm) Back above, remove the 19mm bolt, underneath again and while supporting the starter, remove the 14mm bolt. The starter can then be jiggled about to remove it completely.
What do you do if pulley wheel bolt is broken on a Honda Prelude?
Depends on which pulley but most have several bolts holding them on. You can remove the broken bolt or simply not worry about it.
If a customer brings in a car to have something fixed and while i remove a bolt the bolt breaks who pays to repair the bolt?
the law on that depends where you are. but generally. you broke it, you fix it
How do you remove a broke bolt?
Insert small bar having enough length in contact with bolt and then do stud arc-welding between bar & bolt.Then turn it as per thread direction.Thus we can remove broke bolt.
How do you hold crank while trying to remove crank bolt?
use impact gun or use the the starter to loosen the bolt with a long Johnson bar or ratchet.
What should you do 99 accord ex alternator bolt broke?
You will have to use an Easy Out to remove the old broken bolt.
How do you remove a coilpack from a spark plug on a 2001 ford pick up with a 5.4 liter engine?
Unplug the wire connecter Remove the 7 mm retaining bolt while trying to remove twist for easier removal
While taking out screws that allow you to remove brake caliper one broke off half way is their anyway that you can still remove that so you can take off caliper?
Youll probably have to drill it out and get a new bolt to mount the caliper with.
Remove bolt from Marlin 81-dl-22 cal rifle?
Put the safety on.....and while pulling back on the trigger (make sure gun is unloaded first) the pull the bolt rearward and remove the bolt. Putting the bolt back in is just the reverse...slide the bolt back in while pulling the trigger back first...the bolt will slide right in. JR
How do you remove the anti pry shield for a dead bolt?
You have to take off the dead bolt then the shield. if your trying to break in use the window or another door.
How do you remove the anti-pry shield for a dead bolt?
You have to take off the dead bolt then the shield. if your trying to break in use the window or another door.
How do you remove a fan clutch on a 1997 S10 pickup 2.2L?
The fan clutch on a 1997 S10 has a bolt on the center of the front. Remove the bolt while holding the clutch still. There is a special tool to grab the clutch fan from the rear to hold it while removing the bolt.
How do you remove a broken exhaust manifold bolt from a 2006 Jeep Commander?
The first step is to remove the manifold. If the bolt is sticking out, remove with a vise grip pliers or stud remover. If broke off flush, drill and extract with an easy out or try to weld a nut to it and turn out that way.
Right side bolt stuck when trying to remove starter motor on rover 400?
A few light taps on the end of the bolt, with a hammer will usually do the trick.
