It bolts to the intake manifold near the throttle body.
on throttle body
Engine,Emission Control System,EGR (Exhaust Gas Recirculation Valve),Exhaust system,ECM (Engine Control Module),
96 and new vehicles use air idle control valve, idle air control sensor, or something to the nature
If you are facing the engine, it is on the right side attached to the motor. If you are facing the engine, it is on the right side attached to the motor.
An engine valve normally needs to be removed from the head for a valve job, or to replace other parts related to its operation like the spring or valve guide. This is normally done when the engine has a poor seal from the valve/valve seat or oil consumption caused by the vavle guide.
on throttle body
Depends on engine and year
A person should know the location of all the parts in their car. The Purge Control Valve is located towards the front of the engine, on the passenger side.
Is it inside the engine it self on top
please Where is the location egr valve in vw 1.8 engine?
The idle control valve on a1999 Ford Expedition is on the upper part of the engine by the throttle body and fuel injection.
The Control Module on a 1993 Camaro is just to the left of the valve cover. It is toward the rear of the engine compartment on the passenger side of the engine.
EGR valve is on the Back side of the intake manifold, close to the throttle body, right in the middle of the engine compartment.
You don't have a heater control valve for this truck.......
The idle control valve works by regulating the idle speed of the engine. The idle speed of the engine is usually controlled by the engine of the computer.
Are you looking for the location of it? It is in front of the Driver's Side hiding just behind the Air Intake Manifold on the engine.
location of heater control valve on 2005 mercury marguis ?