0
From Lexus Web site: This procedure should be used to reset the light when the maintenance has been performed:1. Turn ignition switch to the ON position.2. Set the Odometer / Trip Display to the ODO mode3. Turn the ignition switch to the OFF position.4. Depress and HOLD the Trip Meter RESET button while turning the ignition switch to the ON position.5. The Service Maintenance Reminder Light will: a. Illuminate solidly for 3 seconds. b. Blink for 2 seconds. c. Illuminate solidly for 1 second. d. Turn off.6. Release the Trip Meter RESET button.7. Turn the ignition to the OFF position.8. Turn the ignition to the ON position, and confirm that the Service Maintenance Reminder Light goes out.NOTE: If the light continues blinking in step 5a, turn the ignition off, and repeat the procedure from step 1.ignition off, and repeat the procedure from step 1.
Depending on the model, this may not work. Your maintenance light is a reminder for every 5000 mile to at minimum have your oil and filter changed.
Still curious? Ask our experts.
Chat with our AI personalities
Ross
Coach
SteveAdd your answer:
Earn +20 pts
How do you reset the maintenance indicator after changing the oil on a Lexus is 250 vehicle?
RX350: With the car ignition off, press and hold the ODO Reset button and turn the ignition to the On position. Continue holding the ODO button depressed until the Maintenance Required light extinguishes, about 15 seconds.
How do you turn off the maintenance required light on a 2005 Corolla S after an oil change?
Look in your owners manual. Instructions are listed.
What is maintenance required light for a 2007 Camry LE?
Read your maintenance schedule. Usually it means that it's time to replace oil, rotate tires and depending on mileage air filters etc.
Dodge caravan maintenance required light?
It is time for some kind of scheduled maintenance. this could mean an oil change or timing belt replacement. Read your owners manual for the scheduled service intervals and compare it to your miles. A qualified mechanic can perform the work and reset the light, parts stores usually use the cheap code scanners so they may not be able to reset this light but you could try.
How do you replace the side markers on a 2003 Lexus es 300?
If you reach behind the light you can twist and pull removing the light bulb socket. Pull out the light and install a new one and do the reverse to install.
