YES IT CAN BE DONE BUT YOU HAVE TO HAVE A ETHER A 4WD BLAZER OR S10 THE FRAME IS 2 PEICES WELDED TO GATHER THERE ARE 2 DIFFIRNT FRONT FRAME HALFS 4WD AND 2WD JUST SAPARATE THE TO HALFS AND PUT THE 4WD HALF ON YOUR FRAME AND THEN SWITCH THE REAR END FROM THE 4WD TO THE 2WD AND YOU HAVE A 4WD
The only thing the same about a blazer and a Hyundai is that they both have four wheels. Two completely different vehicles. The four cylinder s-10 pickup is the same as an Isuzu hombre.
There is a problem in the distributor. Either the pickup coil or the ignition module are defective. It may be cheaper to purchase a remanufactured distributor.
no 84 and 85 change out.
Possible reasons why you have no spark: Bad ignition module Bad pickup coil Bad engine control module Wiring issues
a 96 Mazda pickup
Will a Chevy Blazer engine fit in a Chevy s10 pickup
if it's out of a 95 blazer it will work
Will a Chevy blazer engine fit in a Chevy s10 pickup
The door shell has the same part number for 99 and 2000 Blazer and S10 pickup.
No not even close.
No. The 2001 TrailBlazer was simply a trim package for the Blazer, which used an electronically controlled 4L60E transmission. The 1992 pickup would have a mechanical 4L60 transmission.
Yes, you need to get a top loader transmission and linkage
If that pickup used a 4L60E transmission (as would be typical for GM pickups with either a V6 or small block V8), yes.
1994 S-10 blazer. In 1994 Chevy introduced a new body style for the S-10. But only for the pick up. Starting in 1995, the Blazer and the pickup are the same. Prior to the 94 model change over, the blazer and the pickup are the same. As for the 94 Blazer, the doors will fit from the creation of the s-10 to 1994. As for the pick up, the first s-10 door will fit the the pick up until 1993. This is your answer.
Not without fabrication.
That really can't be answered. Are they stock? What are the sizes of the tires? What type of s10? What type of blazer? An s10 truck's tires should fit an s-10 blazer. A s-10 truck might be too small for a stock K5 blazer. The lug nut pattern from 1982 on s-10 pickup and s-10 blazer is 5x4.75 inches. OEM rims were 15x6 in 1982 and 15x7 from 1982 on. So s-10 pickup wheels would fit an s-10 Blazer. S-10 wheels will not fit a full size Blazer.
Chevrolet introduced the K5 Blazer in 1969 on a shortened K10 pickup frame. It was GM's answer to the Ford Bronco, International Scout, and the Jeep Cherokee series.