Turn the key into the off position, then turn all the way on with out turning the motor over and let it sit like that for 10 min without touching it. This will reset the anti theft program in the cars computer. After 10 min turn the key to the off position and then try to start the car. It works everytime in this situation. Cars come into my shop all the time for this same issue and other shops stick it to people that are not aware of this common GM defect. I hope this helps and saves you from being ripped of by greedy shops.
my car is a Pontiac Aztec 03 and when i shut off the ignition the key stay locked inside the switch where the key goes in, after all that the car turns off automatically and the alarm wont work nor anything inside my car,what should i do so this wont ever happen again?
You cannot bypass or reset the Securilock anti-theft system on a 99 Ford Ranger. If the system begins to malfunction and you can no longer start the vehicle, you will likely need to replace the transponder unit that is located behind the ignition in the steering column.
Somehow you set off the antitheft system. In order to reset it you have to unlock the drivers door with the key.
If you have a remote that locks & unlocks your antitheft system it could be as simple as resetting your remote, I had a similar experience.
You can't bypass or reset security system, bring it to the dealer.
easiest way to reset the car is to pull the battery cable and let it sit for 20 minutes of so. This removes all volatile stored data from the engine management system. Make sure you write down any radio codes beforehand.
disactivate the antitheft
You can reset your antitheft system by removing the antitheft fuse. Keep the fuse out for 10 seconds. Replace the fuse to its original slot.
The easiest way to reset the antitheft system in your 1998 Mercury is to remove the antitheft system fuse. Keep the fuse out for 10 seconds and then replace it to its original position.
how to reset the antitheft alarm system in a 1996 Chrysler town&country lxi
Were is the antitheft switch
The easiest way to reset your antitheft system is to remove the fuse. Leave the fuse out for 10 seconds and then replace it to its original slot.
You cannot bypass or reset the Securilock anti-theft system on a 99 Ford Ranger. If the system begins to malfunction and you can no longer start the vehicle, you will likely need to replace the transponder unit that is located behind the ignition in the steering column.
When your alarm system is malfunctioning the horn will be when the engine is off. You will need to reset your antitheft system.
.You can reset the antitheft system, on your 2003 Chevrolet Cavalier, by removing the fuse. Keep the fuse out for 10 seconds. Replace the fuse to its original slot
how do you reset anti theft on a 1994 toyota camry
How do you reset antitheft in oldmobie auroa
by reseting the eclipse alarm