How to make an homemade tattoo gun?

Answer 1

Well, to make a really simple toy that shoots, get a piece of wood long enough to stretch a rubber band on, glue another piece of wood on the bottom for a handle, and glue a wooden clothespin on top. You wrap the rubber band around one end of the wood (barrel), put the other end in the clothespin, and then the clothespin becomes a trigger, and you can aim and shoot. Not an amazing air rifle or anything, but it works. If you shape, sand, and paint, they can look really good as well.

Answer 2

How To Make a Marshmallow Blow GunTo make a marshmallow blow gun, you'll need about 25 inches of Schedule 40 PVC pipe, which is inexpensive and can be purchased at any home improvement store. It has an inner diameter of 1/2 inch, which is perfect for mini marshmallows. You can cut the pipe with a hacksaw or inexpensive pipe cutter, which can be purchased at the store where you buy the pipe.

Parts needed:

• Six (6) three-inch pieces of PVC pipe
• One (1) seven-inch piece of PVC pipe
• Two PVC elbows to fit the pipe
• Two PVC "T"-fittings to fit the pipe
• Two PVC end caps to fit the pipe
• Lots of mini marshmallows

Full instructions and pictures for making the marshmallow gun are at the Related Link "Cub Scout Pack 002: How to Make a Marshmallow Blow Gun."

Answer 3

I'd recommend buying your first tattoo gun. There are many cheap guns out there that are fine to practice with and get your technique down. Eventually you will want to invest some money into a new, more expensive gun and when you do you will want to be able to repair it if it breaks or wears out.

Learn the parts to the tattoo gun and how they interact with each other. Surf the net and see what replacement parts are available. Once you know your tattoo gun inside and out you will be able to put together one of your own with parts readily available from many vendors.

Answer 4

A tattoo gun, or mechanized needle drive, is a fairly complex mechanical device, and requires substantial knowledge to build or use. (see related link)

Answer 5

It's actually called a tattoo machine. It would be cheaper to actually buy a professionally made tattoo machine than to make one with the correct materials.

Answer 6

Some links below.