0
What else can I help you with?
How many populatian on 2010?
Over 60 billion.
How many water lilies did Monet paint?
Can't find an exact figure. Anyway more than 60.
How much the pulse pressure should be?
40-60 is healthy
How much are William harlock paintings worth?
How much William harlock painting worth
Your blood pressure is 98 over 60 is that ok?
It really depends on the age of the person.
How far can you safely bore the 350?
60 over. any more runs too hot.
How much can you bore out a 350 Chevrolet before it will blow up or start to impare performance and life of the engine?
ive heard you can go 60 over (.060)
If you bore a 350 engine 60 over what size does it become?
it would be a 360. if .30 over is 5 cubic inches then .60 over would be 10 cubic inches
What is a 350 block bored 60 over 327 crank pop up heads and pistons called?
A 350 block with a 327 crank is called a 327. Bore it 60 over and it becomes a 337. Don't know what pop up heads are. Never heard of that.
What is 330 engine bored 60 over?
Makes it a 350. 330's and 350's were the same small block with different bore. 330's will take a 0.060" overbore safely and can usually be bored to accept 0.060" over 350 pistons (for a total 0.120-0.125" overbore) if desired. It is safer to stick to a 0.060" overbore, to allow fitment of standard bore 350 pistons, however. The rule of thumb when it calls for overbores is 5 CI per .030 bore in a small block and 6 CI on 400 CI and above
What is the bore size of a 283 bored 60 over?
283 bored .060 over should b abour 292 cubics A standard bore 283 was 3.875", so 60 over would be 3.935.
How far can a 350 Chevy engine be bored out?
Up to 60 over but I personally wouldn't go past 40 if u plan to run any kind of horse power. Make sure u can buy 60 over pistons before any bore is done
If you bore a Yamaha blaster 60 over does that make it a 260cc?
yes
I thought a Chevy 350 bored 060 over was a 383?
No a 383 is a 350 with a 400 crank. A 350 bored 60 over is 361 cubes.
What size is a 350 bored 60 over?
a Chevy 350 bored .060 over would be 360.4 cubic inches
what is 350 over 600 simplified?
350/600 = 35/60 = 7/12 = 0.5833333333333333
What is a 350 engine bored 60 over called?
Technically it's called a 360 since that's how many cubic inches it now displaces. 4.060 bore X 3.480 stroke = 360.421 cubic inches.
