The 1990 Chevrolet S 10 pickup truck 4.3 liter air-conditioner compressor can hold five pounds of Freon. Most Freon recharge kits will tell you when the Freon is full. If the system was void of any oil it would probably take 8 to 10 ounces of oil for proper lubrication. If you are only replacing the compressor, add three ounces to the suction port and be sure to turn the compressor by hand several turns clockwise after installation to disperse the oil through the pump. The refrigerant it takes to fill that system is more like 30 to 36 ounces not 5 pounds.
Does not contain any Freon (R12). Freon was banned and has not been installed in any vehicle since 1995. there is freon in a 2000 durango,its in the air conditioner line,and it takes about 3 to 5 cans to fill it depending on how much is in it. you can buy everything you need to fill it up at walmart.
There should be a sticker under the hood somewhere that tells you how much R134a freon and how must oil the system calls for.
Paper can hold exactly 4.5 kg
2000 songs,or vidoes or apps
if the a/c is empty it can hold 1.9 to 2.1 pounds of freon
How much freon shouls a 1986 Chevy converion van hold 3/4 ton air in back also
1.88 pounds of 134
2.88lbs
As much as the manufacturer says it should hold. They are all different.
depemds on the car as how much freon it will hold. some cars have a tag saying how much freon the car is filled with. Too much freon is just as bad as not enough freon.
2-5lbs
1 ton.
My guess is 64 ounces.
28oz if completely empty
two qt.
Need engine size.