If you have the owner's manual, it will show you how many quarts of oil this thing will take. If not, then the best way to go about it, is to put in 4 quarts, start and run the engine for a couple of minutes, shut it off, wait a couple of minutes, check the oil level on the dipstick, and add accordingly. But, do not ever overfill the crankcase with oil-Never above the full mark.
Chat with our AI personalities
if engine is a 2.3 6qts w/filter
==================================================
According to the 1996 Ford Ranger Owner Guide :
With engine oil filter change :
The 2.3 liter four cylinder engine takes ( 5.0 U.S. quarts )
The 3.0 liter V6 engine takes ( 4.5 U.S. quarts )
The 4.0 liter V6 engine takes ( 5.0 U.S. quarts )
According to the Haynes Repair Manual....Put 4 quarts in initially then add more after the engine has run. They mentioned that the 6 cylinder engine has a 6 quart capacity.
How many cold cranking amp do a 2001 ford ranger needs?
( 5 quarts ) with engine oil filter change
4 - modern combustion engines use 1 spark plug per cylinder. ANSWER The 1994 Ford Ranger 2.3 L has Ford's twin plug ignition system , so there are 8 spark plugs The 94-95 Ranger 2.3 has twin plug system, 2 per cylinder =8
My 1987 corolla fx took 11.4 to fill on a pretty empty tank.
32 dry quarts1 bushel = 64 pints = 32 quarts