No specific number as what you are going for is the color to be even all around. Once it is even than a clear coat is applied. If you are asking how much paint it will take to paint a car depends on the cars size. A 70 Chevelle doing a color change without a vinyl top takes right at a gallon
Chat with our AI personalities
One half a gallon should be enough to paint most any car and probably one gallon of thinner.
You get less coverage with the first coat and better coverage with the second.
Check the back of the paint can
To make a reasonable job it will take 25-30 cans. -Cheaper to buy a small paint gun.
Spray cans are filled by weight and not volume and it would depend on the size of the spray can, but it should take about four to five 12 oz net weight cans of spray paint to equal approx a quart of paint. How much makes it on the project and how much ends up as over spray depends on the painter.
divide 15 by 1.3 =11.5. So you will need 12 cans for your first coat. Second coats take less.
yes it is possible to spray paint a styrofoam ball. before spray painting a styrofoam ball, you must take a wet papertowel and smoothen out the styrofoam ball with it.
You can but flow will not be optimum and it will take more dry time
Try WD40 spray it on a soft cloth and gently rub the paint. Let the WD40 work to soften the paint over spray. WD40 is a solvent and a cleaner as well as a penetrating oil. It may take some time to get it all off just go slow and don't damage the finish of the car. Good Luck!