0
What else can I help you with?
How many 60 watt light bulbs can be powered by 1000 MeV?
None at all.
How many amps do light bulbs draw?
Depend on watt and voltage use of light bulbs. You can use this ohm's law formular to calculate the current draw on light bulbs. I (current in amp) = P (watt)/ E (voltage) If 25W light bulb use in 115V AC (resident home) then current draw will be: 25/115 = 0.22A or 22 miliamperes. Hope this help.
How many 100 watt light bulbs can a wind turbine light if it produces 200kW of electricity?
if it works at the nominal power of 200kW (i.e. there's enough wind!), it's simply 200000/100=2000 light bulbs
How many lumens is equal to 5 watts?
There is no direct conversion . . . different types of lamp bulbs put out different amounts of light per watt.
How many light bulbs are in the Empire State Building?
The Empire State Building contains 3,194,547 light bulbs. so my house has like 55 light bulbs, what the hell. :P lol
How many 600 Watt light bulbs can be lit with a 300 watt generator?
None.
How many 100 watt light bulbs can 200 kW light?
2000
How many 100 watt light bulbs can run with a 1500 watt power inverter?
we can use 12 no's
How many 75 watt fluorescent bulbs are needed to give as much light as a 75 watt incandescent bulb?
A 15-watt fluorescent should produce about as much light as a 75-watt incandescent.
How many 60 watt light bulbs can be powered by 1000 MeV?
None at all.
How many watts comes out of a portable generator 120volt outlet?
This is calculated using OHM's LAW, a set of mathematical equations, where TWO facts must first be known to calculate DIRECT CURRENT (DC such as a car battery system) or THREE facts must first be known to calculate ALTERNATING CURRENT (AC as in the portable generator or a household electrical outlet.) In order to determine WATTS for a generator producing 120 volts AC we also need to know the AMPs the generator is capable of producing and its POWER FACTOR (PF). Since the question reveals just ONE of the three facts (volts) to be known, an answer cannot be calculated. The formula is WATTS = VOLTS x AMPS x PF. If the "nameplate" containing the required information is missing there is a simple way to estimate the generator's WATT capability. Run the generator, plug in a bank of light bulbs. Start with perhaps five 100 watt bulbs to equal 500 watts. Add additional 100 watt bulbs until the circuit breaker "pops" and the bulbs are turned off or the generator quits. If electricity quits with 11 light bulbs (1,100 watts), remove one light bulb and try just 10. If this works okay the generator can be estimated to produce 1,000 watts. 15 bulbs would equal 1,500 watts. Light bulbs will be the most accurate "load" on the generator for estimating wattage. You can also attempt to determine the make and model number of the generator and search the Internet for its specifications or contact the manufacturer direct. -- BF
How many cows would be needed to light four 100-watt light bulbs for 24 hours?
Depends on what the cows were doing!
How many amps do light bulbs draw?
Depend on watt and voltage use of light bulbs. You can use this ohm's law formular to calculate the current draw on light bulbs. I (current in amp) = P (watt)/ E (voltage) If 25W light bulb use in 115V AC (resident home) then current draw will be: 25/115 = 0.22A or 22 miliamperes. Hope this help.
How many solar panels are needed to light up five 27 watt bulbs?
It depends on how many watts each panel can produce.
How many 100 watt light bulbs can a wind turbine light if it produces 200kW of electricity?
if it works at the nominal power of 200kW (i.e. there's enough wind!), it's simply 200000/100=2000 light bulbs
How many lumens are in a 60 watt incandescent bulb?
Depends on the bulbs efficiency. The ones I've gotten in the past few years are between 700-800 lumens. Check the packaging, it should state.
how many 10000 watt bulbs can be run with a 10000 KW watt generator?
At full power, 1000 of them. Did you really mean 10,000 watt bulbs? They do exist, but they're not at all common, and it's hard to imagine where you'd need a thousand of them. Most theatrical lights, which are considerably brighter than home fixtures, have bulbs in the 500-1000 watt range at most, with a few professional-grade fixtures going up to maybe 2500 watts. A ten thousand watt bulb might be used in a lighthouse, or perhaps in a searchlight.
