0
Stick them together with superglue
Wiki User
∙ 15y ago
Wiki User
∙ 11y agoJust tie a knot!
Add your answer:
Earn +20 pts
How do you make a Chinese ladder bracelet?
First, you get two pieces of string. You tie a tight knot and tape it to a table or flat surface. Then, you take one string and cross it over the other, making a shape like the number 4. You then pull it tight to make a knot. You keep doing this until you want to switch. Then, you switch the use of the string and do it until you finish all the bracelet. Tie around your wrist in a knot.
What are the two steps an artist would use BEFORE joining pieces of clay together?
Cross Hatch and Slip
How do you make a lanyard with 4 strings?
Making a lanyard with 4 strings is just like making a lanyard with 2 strings, only you add one for each dimension. You can find videos on making a 4 string lanyard here: http://www.laneyards.com/2008/11/quad-stitch.html
When you are sewing or stitching why do you need a seam?
The seam is simply the name of the line that is created when two pieces of fabric are joined together. If you are sewing any two pieces together, the place where they are joined is called the seam. Maybe you are wondering about the seam allowance, which is the amount of fabric alloted to sewing the pieces together. The seam allowance is the distance from the edge you put your line of sewing. In many fabrics that allowance can be very small, but some fabrics require a larger allowance to minimize fraying.
How do change balls of wool when knitting a scarf?
When the first ball of wool is close to the end, change it. Just finish the row you are on, then instead of using the first ball of wool, start knitting the next row with the second one. Leave a little bit of wool from each skein hanging off of the end of the row, and after knitting a few stitches, you can tie the two pieces of wool together. When you are done making the scarf, you can cut off the loose pieces that are left over from making the knot.
How strong is twine?
Twine is two or more strands or string, typically yarn, twisted together to compose a stronger strand of material. Normally, when you pull on a single string, the force is put entirely on that one string. If you have two separate strings, you're faced with the same problem. By twisting the two pieces of string together, the force extracted when pulled together is divided between the two pieces, and because they're no longer perfectly straight pieces of material, it is more difficult to break or rip.
How to make string crosses?
A string cross is also known as an eye of God. You need two sticks to make the cross, and a lot of colored string. You can use yarn also. Make a loose knot with one end of a string to tie the two sticks together in the shape of a cross. Now take the string and weave it around the sticks, starting at the place where they join. Pull the string over one stick, under the next, over the stick, and under the next. Keep the string pushed up close to the previous row, unless you choose to make a very lacy, open design. Keep weaving the string over and under until the design looks the way you want it to. Most string crosses have between one and three inches of stick left. If your string isn't long enough, tie it off at one of the cross arms, and tie the next one on. Some people tie the two strings together, but I wouldn't suggest that, because the knot shows when you are finished.
How do you make a design on string?
it is easy you will need two or four pieces or string it depends on how you do it. if you have two pieces of string line up the corners then fold them.if you have four just tie them into a knot. take two pieces of the string.put 1 in your hand and drop the other 1. now with the string in your hand fold it across from where it is and hold it. with your other hand take the 2nd piece of string and do the same. when you are done with that put the other 2 in your hand. and drop 1 of those. with the 1st one you will go over then under the first 2 strings(that you are still holding) and than pull(but not too hard) do the same thing with the other string and keep going!
With what do you play cats cradle?
a piece of string , yarn , shoe laces , anything long and thin , should be about 6 inches , tie the two ends together to create a circle.
How do you make a Chinese ladder bracelet?
First, you get two pieces of string. You tie a tight knot and tape it to a table or flat surface. Then, you take one string and cross it over the other, making a shape like the number 4. You then pull it tight to make a knot. You keep doing this until you want to switch. Then, you switch the use of the string and do it until you finish all the bracelet. Tie around your wrist in a knot.
How do you Make a Cobra With Plastic String?
first you get two pieces of string. then you make a granny knot.then you talke the longer string and put it in and then out. there you go a cobra.
What use to hold two pieces together?
Glue, nails, screws, nuts and bolts, staples, string, clamps, and so on.
Where was a softball made?
A softball is made of leather on top and yarn or string to hold the two pieces of leather together. Inside is compresed foam or urithane foam.
How do you make a chip costume from Beauty and the Beast?
to make a "chip" costume, cut out two tabe lengths orf cardboard. get a white sheet and some string as well. Tie the two pieces or cardboard together using the strings so that the strings come across each shoulder. pull a white sheet over them and paint the white sheet like you would a teacup.
Does any one know some cool handmade toys for parakeets?
yeah! 1. take a long string 2. put roles of toilet paper roles on the string 3. separate the rolls with cheerios 4. tie the two ends together and hang it in the cage
Is a chain reaction more likely to occur in two separate pieces of uranium-235 or in the same two pieces stuck together?
Stuck together.
How do you make a Chinese lantern for a good grade in school?
fold it in half (hamburger), cut as many lines as you want, tape or glue the two ends of the paper together (forming two circles, one on top one on the bottom), press the two circles together. Then, you can hole punch it and tie it to a string. Wa-La!
