I know of two ways to reset your body control module.
1. Disconnect your battery positive cable and let it set for at least an hour. Then reconnect the cable and turn the key on (do not start the vehicle) and let the computer relearn the settings. Give it 20 seconds then start your car. This has worked for me in the past.
2. Take it to a dealer and let them reprogram the module. This will cost around $100.00 depending on the dealer.
New BCM's cost around $600.00 and then you have to pay a dealer to program the new one to your vehicle. Good luck.
It is under the dash near the steering column.
below left side of instrument panel
I sent my original module to a company i found on google - www.myairbags.com They reset it for $55 and shipped back to me for free!
It is on the back side of the under dash fuse box.
The engine control module is covered in the powertrain warranty for your Kia. The engine control module should be covered for 100,000 miles.
It doesn't have a body control module.
Were is the body control module located on 02 Saturn L 200
Scan tool or battery disconnect.
How do I test body control module and is it hard to do..
How do I test body control module and is it hard to do..
There is no such thing as a bypass module. The best I can figure is the Body Control Module. If this is the case then you will have to find a shop with a scanner to do it. If you have NOT made the necessary repairs then the light WILL come back on.
The body control module can have everything to do with it. If the engine computer and the body control module do not have communication between one another than the engine will start then die after 2 sec.
It is called a throttle body control module. It is in the engine compartment on the top of the engine.
The body control module is located behind the glove box.
The body control module is under the dash on the driver side.
where is the location of the body control module on a 1998 grand am se
You can find the 2001 Buick Century Oddie control module on the passenger side firewall. The body control module will be near the bottom of the firewall.