To remove the tailgate lock on a 1989 S-10 Blazer, first remove the cover over the inside of the tailgate by removing the bolts on the side and on the handle. Pop the vinyl away from the tailgate. Then remove the bolts holding the lock on and remove the lock.
Remove the retaining ring, from the top of your 1997 Ford Astro ignition lock cylinder. Remove the wiring harness from the back of the ignition lock cylinder.
A locksmith may be able to remove the broke key and make a new one. Or just replace the ignition.
It is not possible to replace the trunk lock on a 1993 Caprice Classic while the trunk is closed. A person will have to remove the back seat, crawl into the trunk and open the lock manually before it can be replaced.
REmove the steering wheel then the lock plate. Then the t/s switch. Remove the key reminder contacts and there is a screw with a different head close to the lock cyl. Remove this screw and the lock cyl will come out. You will need a puller for the steering wheel and a tool for the lock plate both rentable from the parts store.
Will the key turn in the cylinder? i f yes the lock rod inside the door has come off.
Remove the panel behind the latch then remove the clip from the lock and it comes right out, it isn't connected to any mechanism inside the tailgate.
its locked while window is down.
To remove the lock from the rear tailgate of a 1988 Suburban, first, ensure the tailgate is in the closed position. Carefully remove the interior panel of the tailgate to access the lock mechanism. Unscrew the retaining screws or bolts securing the lock, then disconnect any linkage or wiring. Finally, gently pull the lock out of its housing to complete the removal.
from the tailgate?or from the glass upper?need more info
Remove the plastic cover on the tailgate. There are screws in the top and sides. After that you should have access to the area where you see the lock. You will have to pull a pin to remove the lock and it should fall right out.
To change the lock on a Fiesta MK6 tailgate, first, ensure the tailgate is open and disconnect the battery to avoid electrical issues. Remove the interior trim panel by taking out any screws and clips, then access the lock mechanism. Disconnect the wiring harness and remove the lock assembly by unscrewing it from the tailgate. Install the new lock by reversing the process, ensuring everything is securely reattached before reassembling the trim.
I had this issue on my '87. I pried the plastic panel out of the channel enough to work the prybar into the latch and work it open.
To fix the tailgate lock of a 2006 Nissan Frontier, first, inspect the lock mechanism for any debris or damage. If necessary, remove the tailgate trim to access the lock assembly and check for loose or broken components. Lubricate the lock with graphite or silicone spray to ensure smooth operation. If the lock is still malfunctioning, consider replacing the lock cylinder or the entire lock assembly.
My Avalanche tailgate locks when I lock the 4 doors with the remote or door lock
To change the lock barrel on a 2002 Fiesta van tailgate, first, open the tailgate and remove any plastic trim or covers that conceal the lock mechanism. Next, locate the retaining screws or clips holding the lock barrel in place and remove them. Once the old barrel is free, insert the new lock barrel into the mechanism and secure it with the screws or clips. Finally, reassemble any trim pieces and test the lock to ensure it functions properly.
Mine was missing the knob for opening it, I bought a new one from www.rockauto.com and replaced it, there are two to chose from, I bought the cheap one and it was a complete unit with keys. You have to remove the inner panel from the tail gate to get access to the lock then remove the clip holding it in and replace it with the new one.
== ==