0
I just did this to my VS Commodore, behind the light (pull carpet back) are three little nuts, remove these nuts and then take off the perspex, the thing holding the globes needs to be twisted off while pushing the side thing down, the instructions should be on this part. I tried calling my male neighbour to come and change it for me because the husband is away, but he wasn't home so I had to try and work it out. I now have working brake lights again. Hope this helps. Cheers
Add your answer:
Earn +20 pts
How do you remove the tail light on a '97 Toyota Corolla DX?
remove the screws which are hard to get to.
How do you remove the burned out rear tail light bulb on a 2004 Lexus Rx330?
2004 Lexus RX330 tail light bulb replacement: Purchase the correct replacement tail light bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement bulb information. Then consult your owner's manual for the tail light bulb replacement procedure. As simple as it sounds, the owner's manual is the best place to start for bulb replacement instructions and illustrations. You may want to consider replacing both left and right at the same time in order to keep brightness and color equal (optional).
Which fuse operates the tail lights on a Kia Sedona?
The tail light fuse will be in the first column of fuses in the fuse box. The exact location of the tail light fuse will be listed on the inside cover of the fuse box.
How do you fix the tail lights on 1989 Pontiac Grand Am Quad 4?
check the fuse and check all tail light , do not assume all light s are good
How do you remove the tail light lens cover 1996 Chevrolet S10?
Open your tailgate and there should be two screws. Your owner's manual should describe this procedure too. If you are replacing a bulb, see sources and related links below for bulb information.
How do you remove Nissan Sentra tail lights?
You can access the Nissan taillights from the cargo compartment. Remove the tail light assembly cover. Remove the tail light wiring harness. Remove the tail light assembly retaining bolts.
How do you remove the tail light assembly on a 2005 Kia Spectra?
You will need to remove the tail light covers in the cargo compartment. Remove the wiring harness. Remove the tail light assembly retaining bolts.
How do you install tail light bulb Chevy Cobalt 2006?
Remove tail light housing. Remove lamp. Replace lamp. Replace tail light housing.
Change the brake light bulb on a Holden Astra?
Remove the tail light cover in the trunk. Take hold of the light bulb connector. Push the connector in and turn to the left at the same time. Reverse the process to install the new light bulb.
How do you remove a tail light from a 2004 altima?
in side the trunk there are is gonna be carpwenting covering the metal part of the body you will see plastic screws remove that then remove the tail gate it self and your be able to remove the tail light in side the trunk there are is gonna be carpwenting covering the metal part of the body you will see plastic screws remove that then remove the tail gate it self and your be able to remove the tail light
How do you remove tail light cover on alero?
Inside trunk, remove thumb screw to fold back paneling near tail lights. Then remove three thumbscrews and the whole tail light assembly can be moved out to change light bulbs.
How to remove the tail light on 2005 forenza wagon?
Open trunk, there should be a few screws that hold tail light assembly to car. Remove screws and pull tail light assemble straight back.
How do you remove the tail light assembly on a 2004 trailblazer?
open the hatch there are two screws remove them and the tail light will come out, after that there are three more screws remove them and you can get to the bulbs to replace them
How do you change tail light on 98 Geo Tracker?
You can access the tail light assembly from the cargo compartment. Remove the tail light wiring connector. Push in and turn the lightbulb, at the same time, to remove it. Reverse the process to install your new tail lightbulb.
How do you remove 2010 tacoma tail light?
to remove tail light's. open the tail gate. remove the 2 10mm bolts with out washers on each side..then you must pull the light straight back....it will be tight but their are no more bolts holding it, only plastic tabs..
You bought some LED tail light that plug into the wiring harness How do you remove the stock tail light sockets?
== ==
Is it necessary to remove the tail light assembly to change the tail light bulb on a Mazda MPV?
Yes unfortunatly
